Thanks. By the way, no other stampings on it besides the 12ga. 9
Doesn' have a marking 502 or 302 on it, I guess its from before those stamping were put on. And no interchangeable powder bushing...
Type: Posts; User: gunhawk
Forum: Reloading Equipment
Thanks. By the way, no other stampings on it besides the 12ga. 9
Doesn' have a marking 502 or 302 on it, I guess its from before those stamping were put on. And no interchangeable powder bushing...
Forum: Reloading Equipment
For the MEC single stage shotgun reloader, (12gauge) I have a charge bar that is stamped on the end 12ga. 9
Its an older charge bar; does anyone know how much charge it throws ? What weight...
Forum: Muzzleloading.
Looking for a similar substitute for the Hornady Great Plains bullet in .54 caliber, (425 grains) as I understand its has been discontinued in this caliber.
Any suggestions appreciated, thanks.
Forum: Muzzleloading.
Looking around , I am wondering why I don't find any .54 caliber inline rifles?
50s, 45s, even 52 calibers can be found. Maybe someone makes them, but if so, who?
I know in the past Thompson...
Forum: Muzzleloading.
I use CCI #11 on TC Hawken .54 caliber. Have always had good luck. They fit well, a nice snug fit, always work. Some tins of them I have had around for over 20 years still work fine, so evidently...
Forum: Muzzleloading.
In my TC Hawken 54cal i use a Hornady .530 round ball and patch. I can just about get the patched ball, lubed with "bore butter" started in the muzzle (tight fit) but then loads and shoots fine. ...
Forum: Case Forming / Re-forming
Guns: Factory rifles out of production. But I have one and I like the caliber a good deal. To me, felt recoil seems low for being a 308 caliber. Aftermarket barrels in 30TC for the TC Encore rifle...
Forum: Case Forming / Re-forming
Can the 30TC case be formed from any other case?
If so, what would be needed and what would be the procedure?
Thanks for any info.
Forum: Case Forming / Re-forming
This new availability of 32 Rem brass ( and also 25 and 30 Rem) is a real godsend. I had been looking everywhere since April when I got the gun, and could find absolutely nothing until now. Some...
Forum: Case Forming / Re-forming
After taking the summer mostly off from fooling around with this gun, as fall arrived I have been reloading and shooting some of these reformed and fireformed cases I mentioned that were made from...
Forum: Our Chapel
You had the goodness of spirit to reach out to this person. Many would not have.
Giving our time to someone, especially those in need and the lonely, is probably the most valuable thing we can give...
Forum: Case Forming / Re-forming
Update: First time doing this. With some boolits on hand, (170gr) loaded with minimum load of IMR 3031, and fired for case forming. Action functioned fine with good case ejection. Fired case...
Forum: Case Forming / Re-forming
I am trying to arrive at 32 Remington cases from 30-30 Winchester brass.
I have once fired, resized 30-30 brass and had the rim turned off by a machinist, and extractor groove cut, then run this...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |