If ya can't think very tender femenine thoughts, don't post em here
BYE BYE[smilie=1:
Type: Posts; User: charger 1
Forum: Cast Boolits
If ya can't think very tender femenine thoughts, don't post em here
BYE BYE[smilie=1:
Forum: Leverguns
Puzzle combined with some can complicate the making of jello
Forum: Leverguns
1 or 2 thou under if shooting cast over 40 cal is fine. This whole "Veral Smith, run a 456 bullet down a 451 hole" is nonsense. Why has Lee sold their heavy 45 cal in 457? ANSWER, It'll bump to size....
Forum: Boolit Lube !
You know when I'm out today I'm going to look at one of those inch/pound torque wrenches with the beam so when I get one thats as close to goopless as it gets I can just torque to that each time
Forum: Boolit Lube !
Seems when You use the larger gator checks and lyman super moly ,(If it's warm enough) it shoves quite a wad of it under the gas check because of the large radius on check.
Thoughts?
Forum: Leverguns
Holy frig I got ranked by the cali-lefties for 2 grains over, now You're subscribing to 4.5 grs over. I say You're nuts, the folk who built the gun are clueless. The people on post 7 of the link...
Forum: Leverguns
No they have no clue Chum. If it isn't in a book somewhere their lost. I use manuals merely as the guides they were intended to be. Some places list as much as 24 grs of 2400 behind that bullet....
Forum: Leverguns
I DO NOT SUFFER FOOLS LIGHTLY
If it's just to say the gun will blow up say it. We don't have to do a big "Where do You live"? Then I take time to respond cause I think i'm getting a notification...
Forum: Leverguns
Ah falicornia. The land where the highest pop of those who make a profession of living fake lives live. Good on You.
BTW We don't have "Firing lines "here. Not that communized. Take care lefty
Forum: Leverguns
Ya So?
Shoots a house afire now. Well once I find the spring I'm missing. Wish someone had a better than manual descrip of trigger parts
Forum: Leverguns
I could. Could call God too. Do as much good being a canuk. They're quik to pick up our bucks but then won't even talk to You. This is actually quite common up here
Forum: Leverguns
apparently I've lost some piano wire spring or such. My transfer bar won't come up all the way. Other than the goof notes AKA barely useful instructions and net vids I need a real pic of the parts...
Forum: Leverguns
Of all my casting experience I've never seen the benefit in going over bore on fit unless it's under 375 cal and You're just not going to get enough obturation, but. Above 375 cal I am at most size...
Forum: Leverguns
And I realized the boo boo was/is all mine. I always think pressure when I think max powder, but apparently that's not the issue when talking 2400 and 45 LC. It's more a matter of efficiency. I...
Forum: Leverguns
Yeah I'm going to fiddle a hair more but if/when I can't get em to work I'll use em in the pistol and with just the peep for earth pigs, then put in the 300's come hunt time
Forum: Leverguns
452 is bullet dia. Have not slugged gun. Then again I have tons of unslugged guns that still shoot cast.
I mean lets me honest. If meant to shoot factory cast I can't see why it would not like the...
Forum: Leverguns
Got some 255 grain bevel base RF's that are accurate in the henry out to 20, but then must only be marginally stable cause at 50 it's more of a pattern than a group
Tried 18 grs of 2400
15 grs of...
Ya I even reduced that to 16. The nice thing with cast as opposed to copper clad is less initial pressure spike. 16 grains of 2400 under the 255 is kinda considered the baby sitters load
well it's all new colt 2nd gen stuff, but I'm going to try 18 grs of alliant 2400
new colt cylinder and barrel should up the pressure limit somewhat
went with 18 of alliant 2400. worried about S.E.E.
Thanks for all the replies. Makes me glad for the help I've given here in years past. Apparently "What goes round comes round" is true. This...
Heard somewhere that to get the holy black type boom some were using the likes of H4198 and RL7 in their 45 LC gen 1 SAA's. I don't care if my boom factor is low but I do care if it's to high. 5.5"...
I have a gen 1 SAA in 45. The ejector tubes a bit ratty. Looking to get a clean one this side of breaking the piggy bank.
Thoughts
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |