Search:

Winchester 748. Good groups and meters nice.

I had the same problem. Check this topic in the forum: http://castboolits.gunloads.com/showthread.php?192564-Winchester-Model-94AE-Broken-Carrier

I have a set of Lyman .38-55 dies. I really like the M expander die. I use starline 2.125 my winchester 94.

I have been using BAC in everything including 9mm, 30 WCF, 38-55, 357mag and 45 ACP. Works great. Have not had a barrel lead good accuracy from all calibers.

I have an SR9c. I found that the Lyman 356402 sized to .358 over 6 grains of HS6 (Winchester 540) shoots well. I tried the Lee 356-124-2R tumble lube but it dropped at .356 and was to small and...

Lyman 358156 gas check sized .358 with 15.5 grains of H110 and Winchester magnum primer in a Ruger Blackhawk 4" barrel. Also shoots good in a friends GP100.

It is interesting to hear that you made the original request. I decided on this design because I had good luck with the lyman 375296 bullet that dropped from the mold at .379 and the 38-255L was...

I ordered my first mold from Accurate Molds and I can't express enough how pleased I am with the quality of the mold. It is #38-255L http://accuratemolds.com/bullet_detail.php?bullet=38-255L-D.png I...

6 grains Winchester 540/HS6 with a Lyman 356402 shoots great in my Sig 226.

Has anyone used the Accurate #46-335B in an 1895 Marlin with Ballard rifling? I have had excellent results with an Ohaus 405F. I would like to try a lighter bullet to reduce recoil. Another...

Being able to move the staff is really nice. I use my MVA midrange on 3 different rifles. Which base did you end up ordering for your 336?

The base is for a Winchester 94 legacy with a tang safety. I used this one to avoid the serial number. They do make a base specifically for Marlin 1885/336. Call them. They were extremely helpful...

Dont by the new Marbles tang sight with windage. They are sloppy. MVA makes an exact replica of the old style marbles flexible sight. I mounted my MVA midrange soule sight on my Marlin 1895. It...

My SR9C loves the Lyman 356402 cast from #2 alloy sized to .358 and lubed with white label BAC and 6.0 grains of Winchester 540. I have a Lee Tumble Lube round nose bullet that tumbles when fired.

31.0 grains of 748 with the Lyman 311041. Meters perfectly. Very accurate in my Winchester 94s.

I just put my MVA Midrange Soule on my 1895. Ended up using a Winchester 94 Legacy base. The bolt is all the way back in the photo. 84456

I have found the Lyman 429244 #2 alloy with 21 grains of 2400 will shoot 2.5 inch groups at 100 yds. out of my 94 16" trapper.

I found that the lyman 356402 sized to .358 with white label BAC lube seated to 1.080 with 6.0 grains of Win. 540 to be a very good load for my Ruger SR9C.

I have a 16" trapper and have killed many deer with it. The only problem is the carriers are weak and break and there are no replacements available.
...

I use a Ohaus 45-405F in my 1895 with a .459 sizer. Doesn't matter what the alloy is. I have shot 30/1 and wheel weights with Linotype and the rifle shoots groups less than 2" consistently using 40...

I use 40 grains of IMR3031 with an Ohaus 45-405-F in my 1895 Marlin. This is not a full load but has significant recoil. 5 rounds is enough at 1 sitting. Just under 2 inch group at 100 yards. ...

68301 Don't buy the new marbles sight. Hunt around and fine an original. You will spend a few dollars more and be much more satisfied. The new Marlbles sights are junk. I own one and will never...

How much do you want for your machined carrier? I could use a spare. http://www.flickr.com/photos/sodcity/8593403699/ Mine also likes them sized .431. The rifle shoots well but the service from...

We have good luck with the Lyman 429244 with 21 grains of H110 or 21 grains of 2400 in the Win 94AE 16 inch sized to .429 with wheel weights plus tin.

65518

This carrier is cast and is extremely thin and weak where it broke.