I used to have a .177 LEM mould, could never get them to shoot in my spring powered rifles but would be interested to try them in my pre-charged rifles. Unfortunately I sold it before pre-charge was...
Type: Posts; User: Lightning22
Forum: AirGuns
I used to have a .177 LEM mould, could never get them to shoot in my spring powered rifles but would be interested to try them in my pre-charged rifles. Unfortunately I sold it before pre-charge was...
Forum: AirGuns
The F in Pentagon mark would suggest a German made barrel for a rifle not exceeding 7.5 joules muzzle energy.
I've had very good results with rust bluing on carbon steel blades.
Forum: Factory Rifles
A nice Remington 1100 LT20, well used but runs like a watch after a good cleaning. Now on the lookout for a set of 20GA tools for my Pacific 360.
Forum: Reloading Equipment
Interesting, mine just looked roughly finished. I built the ally one with a 3deg slope on the tube. There's an M8 threaded hole in the base which will allow me to add a base to adjust the height if...
Forum: Reloading Equipment
I can do blued but dread to think how long it would take to cut from a solid bar on my Myford, case colouring I can't do sadly.
Forum: Reloading Equipment
I didn't, just polished and deburred. The Lyman one is just rough inside.
Forum: Reloading Equipment
I made this recently to replace the nasty plastic Lyman trickler I own. It did the job but this just does it nicer.
It is turned from a solid aluminium bar with brass bearings inserted before the...
Forum: CB Loads / Military Rifles
Well, this one is mine and seeing as it is on my licence I'm not right fussed about who knows I have it.
Fazakerley No4 Mk1
179867
Forum: Gunsmithing Tips & Tricks
Likewise, it looks like the arrangement on my BRNO.
Forum: Special Projects
That's a beautiful little side by side, I'd love to add a nice one like that to the cabinet.
Would you consider doing a build thread for the case when you make it?
Forum: Rimfire Area
One of these is on my shopping list when my licence comes back from renewal.
Forum: Rimfire Area
I've got a Sako Quad in .17HMR, it's an excellent rifle that has taken many rabbits and a few foxes but I wouldn't hunt squirrels with it. A miss at a high angle isn't a risk I would take. My BSA S10...
Forum: CB Loads / Military Rifles
I've found that NOE will post to the UK by running through the order process online, not had a reply from either of my enquiries though.
Forum: CB Loads / Military Rifles
Thank you gents, I have enquiries in with NOE and LBT to see if they will deal overseas.
Forum: CB Loads / Military Rifles
I've been using the .312 Lee 185gn mould, beagled out to .314 and then powder coated on top for lubrication and a diameter at the widest point of .316 and then at 90deg they measure .314. I've...
Forum: Our Town
There are plenty of gun owners in France, from memory the main restriction is on military chamberings.
Forum: Reloading Equipment
I might have some Herters dies kicking about, give me a couple of days to have a look. In the meantime if you've got links to any pictures of the parts you are after that would be a great help.
Forum: Reloading Equipment
The top one looks like a Lyman Easy (or Ezy) with the charge bars, top cover and bottles missing, the bottom one is a new one on me.
Forum: Gas Checks
I might have known you were on here! I've just dropped you an email.
Forum: Reloading Equipment
I think I've got 4 scattered about, three for shotshells (Lyman Easy, Redding #16 and a Pacific 366) and a lone RCBS JR3 that I load my .243 and .303 on.
It's the .303 that has brought me back...
I made my own for .410, I used the diameter of an open shell for the outer edge of the 'roller' and the inner diameter of a factory rolled shell for the diameter of the 'island' in the middle of the...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |