Search:

I have some 165 gr pb cast that I am trying to work up loads for a .30/06. I have tried the slower powders from an old Lyman book and gotten poor results. Can you suggest a good load using H4895...

Ben, the cast boolits I have were made by Missouri Bullet and weigh 165 grs. They measure .309 at the base and .300 in front of the top lube band. I have not slugged the bore on my rifle, but as I...

Ben, I am using commercial cast 165 gr boolits with bevel base, not made for gas checks. The maker says they are BHN 18 and should be OK for 1600-1800 fps. I first tried 17 gr of 2400 and groups...

Are you using gas check boolits? I have tried 165 gr plain base in my 1917 Enfield with 16 gr 2400 and the group is about 8 inches at 50 yards. Boolits are seated just short of the rifling, base...

Larry Gibson,
You mention 2400-2600 fps with 160 gr cast, is that with or without gas checks? I am trying to develop a load for an Enfield 30/06 with 165 gr plain base beveled cast boolits with BHN...

I have some 165 gr. Missouri Bullet PB cast that I am trying to get a good accurate load in my 30/06. I have tried 17 gr 2400, 14 gr 2400, 10 gr Blue Dot, and 25 gr H4895 but nothing accurate so...

I have some 158 gr cast from Missouri Bullet with BNH of 12 and want to load using 2400 powder. What would you recommend for about 1100-1150 fps that would keep down leading and burn clean? I was...