Search:

No doubt. That's a nice looking design and target.

I think the ranchdog design's were made to fit and fill the throats of marlin lever action rifles and also feed from the magazine. This particular one was designed for a 444 marlin, but I guess it...

https://i.imgflip.com/8praoa.jpg

.365 meplat......
https://i.imgflip.com/8pracr.jpg
https://i.imgflip.com/8pr94g.jpg
Its gonna have to start with a .4, but that 253m would make a great 45 super...

I use an mp 360-640 hp. It drops 145gr as a deep hollow point and 155gr as a solid. It will give you the option of multiple weights by changing the pins. Feeds great.

Wadcutters? In a 45 colt or a 44 mag?

https://i.imgflip.com/8pojws.jpg
https://i.imgflip.com/8pojy4.jpg
https://i.imgflip.com/8pojru.jpg

That's crazy talk. :bigsmyl2:

https://castboolits.gunloads.com/attachment.php?attachmentid=55810&d=1355352566

Here you go.

I've used cfe pistol in 45 colt a little. It's all gone now, but I tried a load with a 260gr bullet. It was a little over hodgdons load. They tested a 250gr with 9.2gr of cfe pistol for 1014fps at...

I think unique would work just fine. :2gunsfiring_v1:
You said +p and unique will get there just fine.

What does that rimrock 255 measure? On rimrocks website it says it's .812, and has a nose to crimp of .373, is that correct? If you're using the 429244 or 429421 as a reference, those have a pretty...

Ahh, these were fired the same day, same bullet. According to hodgdon 26, around the same pressure.

45 colt starline brass 300 cci primers
Ruger Blackhawk 4 5/8" barrel
15gr HS-6 1202 avg 13...

These are Ruger loads.
Ruger Blackhawk 4 5/8" barrel
Noe 454 260rf starline brass cci 300 primer
20.5gr 2400
1192avg 26 sd 62 es

Now from 20" barrel rossi 92
1583 avg 15 sd 42 es

22gr...

D36-07 or ultimate pistol is incredibly clean.

Just looked on Lee's website and they have .351, .352, .353, .354 ect ect sizers all in stock.

^^^Laser cast 200gr swc 1.24 oal
8.5gr aa5 977fps
9.5gr aa5 1076fps

A laser cast 200gr swc is .64 long and loaded to 1.24 oal,

5gr red dot 978fps
5.5gr red dot 1030fps
6gr red dot 1076fps

5.5gr American select 980fps
6gr American select 1048fps
6.5gr...

Now that had some stories I hadn't heard before. Thanks.

I use around 17lbs of coww and add 1 pound of monotype. I'm not sure what to call it other than a mongrel alloy. I think it close to 4% antimony and 1% of tin. I do powder coat them with a dark grey...

https://i.makeagif.com/media/11-25-2015/V1sNVK.gif

357 magnum, 44 magnum, 454 casull, and 460 Rowland all have what in common?

https://media.tenor.co/images/d299df5e965b89f051b9a24cad453f79/raw

It's a 2 cavity. Yes, I should've got the 6. It hurts my back just thinking about that 2 cavity.

Here's a description from a retailer that sells murmom hmf large pistol primers.

The large pistol primers, KVB45E, have been extensively tested in the .45 acp with good results but have not been...

I have som of those. I believe it takes a higher powder charge to get to the same spot as you would with a normal primer.

I wonder if a .457 crimp would create a kind of muffin top effect to the bullet.

Midway was trying to get rid of it a while ago. They were selling #1 for $18 and 5# for $98, so I have a bunch too but haven't really messed with it that much. It's pretty fluffy so in some...

A couple more piles for the super. Some ranchdog 290, noe 260 rf, 200gr lee rf and some 200gr lee swc.

https://i.imgflip.com/8n9m1t.jpg
https://i.imgflip.com/8n9lwk.jpg

Description: lee 200 9gr longshot
Notes 1: 1.2 oal barnes +p brass
Notes 2:
Distance to Chrono (FT): 10.00
Ballistic Coefficient: 1.000
Bullet Weight (gr): 208.000
Altitude (FT): 0.0
Temp:...