Here ya go:
http://lsstuff.com/store/index.php?main_page=index&cPath=5
CPL Lou
Type: Posts; User: CPL Lou
Forum: Boolit Lube !
Here ya go:
http://lsstuff.com/store/index.php?main_page=index&cPath=5
CPL Lou
Forum: Cast Boolits
Works for me as well.
I also use it with my 38 Specials, to keep the cases from resizing my boolits.
CPL Lou
Forum: Vintage Reloading Manuals
Your age is showing ! (I have the older versions of 3 of the 4 items. shhhh)
CPL Lou
Forum: Hunting with CB's
I've found that using a magnum primer and a heavy crimp while working with IMR 3031 in the 45-70 makes for small groups and cleaner burning powder.
My .02
CPL Lou
Forum: Cast Boolits
I use the powder through expander die for the 38 S&W, works like a charm !
https://www.midwayusa.com/product/209266/lee-carbide-3-die-set-38-s-and-w
I think you can locate just the case mouth...
Forum: Cast Boolits
My least fun rifle to shoot was a big box store version of a Remington 700 with a black plastic stock that I purchased in the mid 90's.
No matter what load was tried, that thing would never group...
Forum: Cast Boolits
Expensive, but doable:
https://rotometals.com/lead-free-bullet-casting-alloy-88-bismuth-12-tin/
CPL Lou
Forum: Cast Boolits
Since my wife was sweet enough to give me a Redhawk Toklat in 454 Casull for Christmas, and since I've never had a firearm in this caliber, I'm keeping a close eye on this thread.
Thanks to this...
Forum: Reloading Equipment
My wife was kind enough to purchase a Lee Loadmaster for me as a Christmas present.
Though I've been reloading for 38 years, I've never owned a progressive press, mostly because of all the scary...
Forum: Cast Boolits
All hollow base molds have to be poured from the nose section.
UNLESS, they get their hollow bases from a swaging.
All hollow point molds have to be poured from the base.
Unless, the hollow point...
Miha Previc is an honorable man.
Nothing more needs to be said, imo.
CPL Lou
I have a 7.5" Bisley Blackhawk that wouldn't shoot cast worth a darn.
Then I read Doug's postings about throats and bought a reamer and opened all 6 chambers.
Now it shoots so incredible that I...
You might find this thread informative too:
http://castboolits.gunloads.com/showthread.php?115657-LeveRevoltuion-Powder
CPL Lou
Using Buffalo Bore 260 HP +P load out of my Marlin 1894 CB 24" barrel I'm getting 1940fps, average for 10 shots.
I get 1515fps out of my 7.5" Bisley Blackhawk with the same load.
I suspect the...
Forum: Factory Rifles
Through the years I have owned a LOT of 30-06's and I can confidently recommend Savage (ANY) and Ruger American rifles.
Neither rifle brand will cost much and are very accurate out of the box.
I...
Buffalo Bore says Ruger level loads are safe:
https://www.buffalobore.com/index.php?l=product_detail&p=335
If you scroll down on the page, you will see a list of acceptable firearms.
The Henry...
Forum: Boolit Lube !
Online purchase available:
http://wolf-ag.com/product/graphite-powder-eflow/
CPL Lou
Forum: Factory Rifles
Remington BuckMaster .30-06 w/Leupold 3x9 VXII
Boyds gun stock, bedded
Nosler 150gr Ballistic Tip
Shot this guy at 305 yards (rangefinder confirmed)
One shot,went 30feet after the shot (farthest...
Forum: Cast Boolits
Oil contaminating the mold maybe ?
CPL Lou
Forum: Boolit Lube !
A couple of things may be going on.
What I suspect is that your cylinder throats are smaller that your bore size.
Another could be the need for a second coat, maybe.
If the leading is happening at...
Forum: Case Forming / Re-forming
I have a couple hundred Lapua brass in 260 Remington, I was just looking for a replacement that was cheaper.
I did recently locate some Lapua brass for $90 a hundred but I would still like a cheaper...
Forum: Leverguns
I would suggest you try this mold out:
http://noebulletmolds.com/NV/index.php?cPath=30_348&osCsid=3of8n6a9c7qno6u886rfm1ad97
Seems to fit the 30-30 like biscuits & gravy!
CPL Lou
Forum: Leverguns
Before you drop a bunch of money on a trigger job try doing this:
Make sure the rifle is UNLOADED !
Cock it, Push on the back of the hammer with a considerable amount of pressure, then pull the...
Forum: Case Forming / Re-forming
Indeed !
I decided to get the AnnealRite setup as I can also use it on a couple of other calibers I reload for, at a decent price.
I'm also going to try Starline 308 Win brass as a starting...
Forum: Leverguns
I know, right ?!
I fire lapped mine, and even used Bore Coat (micro ceramic technology) and it helped some.
Not enough to make it cast boolit worthy though.
Oh well, it shoots jacketed like a...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |