Search:

I got this 1 from a fellow on here about 5yrs ago I only use it once a year or so to load up a bunch of 38 has the primer mod, large powder mode as well and the little dandy meter plugs all got...

Cleaned up my bench and made some changes, it gets most jobs done and Amos enjoys his new spot..

http://i1376.photobucket.com/albums/ah20/Hotwheelzz/benchc_zpsag3heur7.jpg
...

Well Ill put this out there maybe totaly diff. situation but it happened to me..

I had been using a dillon 550b for 5-6yrs, when you dont fully seat a primer on the 550 the shell plate will not...

So I generally run 650-700dg for normal casting but I got a new hollow point mold from Miha 45 200gr and was told to run hotter to get good fill out so I did 800dg and the mold works great these are...

DA= double action this is when you pull the trigger it will cock and fire the gun
SA= you have to cock the gun before firing { most 1911's are single action only}
DAO= double action only { usually...

Looks like a good first try to me 1 thing i would say is watch your belt loops I would sudjest you either stitch all the way around the opening and use a slicker or a beveler on those edges or go...

Well not really an axe but I have had 4-5 of these buck 106 hatchetts since i was a kid got my first 1 along with a buck 110 when i was 7 the first year i got togo hunting and I dont go into the...

The can says if you bake it on the wrinkle would be tighter and I wanted some thick heavy texture so I didnt, but will cure at room temp. takes 1-2 hrs for the wrinkles to really show and says let...

Thanks

Well after trying the Hammertone I really didnt like the finished look, very tough but not what i was after. So stipped down to bare metal again and used some VHT wrinkle plus and its perfect for...

As I sit here today learning from the many post, with all the ideas I have in my head of things todo and try, and find some many of you thinking the same or have so in the past. From a guy whos dad...

Hi guys got this press today from a fellow cast boolit member and Im just try to get some info about it any have 1 or ever use 1? Do you mount it horz. on the bench or on a post in a vert. position...

I have used that stuff on engine parts works well but if I remeber right doesnt have as much texture as the older presses do plus Id have to wait for the misses to be gone so I could put it in the...

Thank you I will go find me some of it





If I cant find some wrinkle paint I will give the sponge Idae a try, and thanks for the advise on the sand blasting I hadnt heard of the soda type...

I picked up this old CH press and 3/4 of the paint was gone all the metal surfaces had some surface rust and pitting but I had big dreams.... It was gonna look like new... well kinda I got it...

the powder measurer on the lyman stand what can you tell me about it?? Inever seen 1 like that ?

Id gladly send you $10 plus shipping for yours... But I paid $150 for the press and powder measurer not as good a deal as yours but Im so happy to have it...

Pressman thanks for the info I just...

Hi guys Im so excited I scored this press and powder measure at the gun show today for cheap.. Is there away to get and adapter of some kind to run regular shell holders also does anyone know what...

Face blacked out to save the inocent :redneck:
http://img59.imageshack.us/img59/8060/getattachmentfxg.jpg
By hotwheelzzz at 2011-06-19

A friend of mine has had these for a long time I finally made some for my self they work slick.. Just get some alum. shaft arrows with an inside dia. of .30 or better cut to the diseried length { i...

WoW those must be 2 handsfull ... Ill work my way up and see how I like them my goal is to get this gun and a good load to hunt with this year I have never hunted with a pistol before. Thanks again...

Thanks for the info guys, I got onto the 600gr hp mihec mould group but 500gr is plain base only this should be fine as I doubt you would be pushing these past 1100-1200fps at max load but truth is...

I got this 500 from a good friend and he gave a bunch of j-bullets with it and 1 lee 2 cavity 440gr gc rnfp mould but I would like to find a 500-550gr cast boolit mold for the gun if it's available?...

There is a teflon washer in there protecting the blade, i have also used some rawhide but it doesnt hold up as long as the teflon..

Well ive done some changing around and I just love this thread so many good ideas i see, I could have cleaned it up but this is the usuall state of things

...