Search:

if the bolt is steel, chemical removal is possible with an alum solution. I have removed broken taps from aluminum with an alum and water solution heated...it just dissolves the steel....

lithium battery packs can be rebuilt if soldering is your thing and you can save $$$ . I have dropped a couple packs and the battery's cracked and do not hold a full charge so I sent them to recycle...

Thank you to all who have replied. I greatly appreciate your replies and they will help me decide what to do when I purchase my new home in central Florida..

Has anyone here had experience with building a home walk in freezer? I was curious and my wife never is happy with our 2 freezers...

fyi: the 22tcm comes in 2 versions. the standard cartridge is made to feed from a 38super magazine and the other feeds from a 9mm magazine...it uses a shorter rounder projectile than the standard ...

I have seen this bulge when someone has taken a Dremel to the feed ramp in the barrel to get better feeding...One guy at my range managed to blow his gun apart by doing this mod...no support at the...

First things first.. If the lee sizing die is carbide it probably needs cleaning. I my experience I have seen undersized bullets caused by buildup on the carbide ring.
The micrometer issue will...

infllation....just wait ... inflation is coming in large amounts soon.......thank Joe..

persistance pays...I recently purchased 2 items from Titan which were 100% unobtainable and the price was old or near to old prices...I found the items by going to look daily and it was worth the...

I agree . Parts to convert will cost more than another pistol..
Just because you can do something does not mean it is the best choice.

for an experienced gunsmith 9mm, 38super, 40sw and 10mm are possible just by swapping parts.
barrel,slide,ejector,extractor,slide lock,springs and magazines....

the shock buffer is preventing the slide from hammering the frame...when the spring is fully compressed it is effectively a hardened tube slamming into the frame..

I have had them check mine against a printed list but never was asked to come back... sounds like a lazy employee....did not want to do the job..

purchased a lee app deluxe yesterday from Titan for $30 less than at midway....

In stock is great... price is above mfg suggested ...looks like Larry has joined the others to take advantage of the shortage...

230gr 300blk from lee mold approx 400 cast today. Great day to cast only 77deg today...usually much warmer.

I use the same 2 molds. They both work well in pistol and rifle.

if you have Netflix you might want to watch Canine Intervention. It gives you an idea how to fix some behavior issues. It gave me ideas I would never have guessed on my own..

There has been little doubt that Nike is evil for some time now....

the most likely cause is the space between the sprue plate and mold which will allow a slight flange to form on the bottom. Sizing them moves the flange causing the condition.. if your bullets have...

I never reload for others... I have offered to loan a reloading press and relevant dies to reload their own...big surprise no one has taken me up on the offer...lol

fixed a dumb mistake...pulled 50 300bo which I loaded with .312 bullets...lol

I have quite a few nickel plated LC 556 brass... so I guess you have just been unlucky to just find them now....

FC brass is not all 223 some is 556... so some 233 as well as the 556 will be crimped .
the best bet is to swage or ream the primer pocket.

In my experience with leading out of round with min width less than bore dia will guarantee leading. I now size all blullets if out of round and most will round up. If your cast is too hard to round...