The SAAMI spec. for the mouth of a 9mm round is .3800 so you're awful close, probably within tolerance.
Type: Posts; User: higgins
Forum: Cast Boolits
The SAAMI spec. for the mouth of a 9mm round is .3800 so you're awful close, probably within tolerance.
Forum: Boolit Lube !
I cleaned out a Lyman 45 several years ago that I bought at an estate sale. I put it in a coffee can of water on the Coleman stove and it didn't have to reach boiling. The lube, which appeared to...
Forum: Swappin & Sellin
For sale is one lot of 500 once-fired PMC .223 cases without crimped primers. Clean and lightly tumbled but not sized, decapped, or otherwise prepped. $60 delivered by Priority Mail with payment by...
Forum: Our Town
You might check prices on bundling all of your insurance with one company. It may not save you a lot of money but it makes dealing with your insurance carrier a lot easier.
Forum: Cast Boolits
A range acquaintance had an article published in the CBA magazine years ago about cast bullets in the 1903 family of rifles in original military configuration. All had excellent to new condition...
Forum: Swappin & Sellin
400 pieces of range pickup commercial .300 Blackout brass with proper headstamp. Mix of U.S. and imported headstamps, some with crimped primers, mostly once-fired. It has been lightly tumbled to...
Forum: Cast Boolits
I only cast a couple of times a year with my Lee Production Pot - spring and fall. Some years I don't cast at all, and since I cast a lot of bullets when I do I like to empty the pot when I'm done...
Before you write off the Beretta 92 as too bulky look at the compact version. When I saw one I thought the Italians had a different definition of what a compact is, but the one I tried was just...
Forum: Cast Boolits
You can get the rust out of the powder with a magnet but then you have to get it off of the magnet which is tedious. An electromagnet would be great for that chore.
Forum: Swappin & Sellin
Still going through the buckets of shotshell hulls and came up with another lot of 325 once-fired Remington 12 gauge gold Nitro 27 hulls. $48.00 delivered to the lower 48 with payment by USPS money...
Large contract orders can probably stipulate a special headstamp with the information they want. I believe 23 would be the year. I've come across Federal (FC) .223 or 5.56 that had a different...
Forum: Swappin & Sellin
Years ago I shipped a partially diamantled shotshell press through UPS in a tomato box, about the strongest readily available box you can find. This was before UPS stores so I took it to a small UPS...
Forum: Cast Boolits
If you slug the bore of your 9mm you may find that that the groove diameter is over the nominal .355. Many 9mms have .357-.358 grooves. I use the Lee 358-124-2R unsized with LLA. They drop from my...
Forum: Swappin & Sellin
Price reduced from $53 to $48 delivered
Forum: Swappin & Sellin
One lot of 325 once-fired Remington 12 gauge gold Nitro 27 hulls. $48.00 delivered to the lower 48 with payment by USPS money order for quicker shipping or personal check if you're willing to wait...
Forum: Our Town
I sold a rifle on a website a few years ago and called the nearest ATF office to make sure I was handling it properly, even though their FAQ answered my questions. I suppose I was getting a second...
Forum: Our Town
In my experience Bradford Pears are notorious for sprouting from the lower trunk and surface roots. To get glyphosate into the roots, cut the tree within a few inches of the ground and immediately...
Forum: Cast Boolits
I got a Teslong borescope a couple of years ago, and it was a real eye opener. All of the following are with jacketed bullets. A .243 that I would not have thought had any pits did have a few small...
Forum: Our Town
We seem to miss getting mail a couple or three days a week, then get a big stack. Just today I received a check that was in the mail for almost three weeks getting here from an adjoining state.
I've used 311291 in 30/30, and 311041 in .308 Win. and .30/06 (2-groove 03A3), all with good results.
Forum: Rimfire Area
I've got some Remington Target SV in the form of white box government SV made for military training that the CMP sold years ago. It's still surefire and accurate in my rifles.
I had one of those early .45 convertibles that had .45 Colt throats that slugged about .456. It shot pretty well with .454 cast bullets. Maybe I just got lucky; the gun did not have any faults...
The above open letter to Starline reminded me that I sent an email to Aquilla a few years ago asking them to consider loading a run of .32 long rimfire. Figured there might be as much demand for .32...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |