Why do people suggest using 7.5grs of Unique with the .44 special under a 250 gr cast bullet when my Manuals say 6.9 is MAX.? I know there is some guns that can handle that load; but what if they...
Type: Posts; User: Leadlum
Why do people suggest using 7.5grs of Unique with the .44 special under a 250 gr cast bullet when my Manuals say 6.9 is MAX.? I know there is some guns that can handle that load; but what if they...
Mine is just 6.5grs of Unique under a 250-k cast boolit; with a good crimp. I can shoot that out of my new Vaquero with out any worries; but still has enough pressure to burn all the powder well....
Forum: Cast Boolits
quilbilly; That was a good suggestion. I have not thought of old shot gun shell lead pellets. Your right. Thanks for that one.
Forum: Cast Boolits
Mtgun44; I`m guessing my lead bullets were about 5 BHN if that?. I would like to get them at least 8-9BHN somewhere around wheelweight hardness. I`ve had good luck with WW in the past. Guess I`m just...
Forum: Cast Boolits
I went ahead and ordered some hard cast bullet lead from Rotometals. I will mix it with my lead. I should be able to throw some of my lead into the mix.
Forum: Cast Boolits
Thanks guys; I think, I will try mixing some of my already made bullets from wheel weights into the mix, just like Boerrancher, and 1shirt suggested. 50/50, and add a little more tin.
I can not find...
Forum: Cast Boolits
I bought some lead ingots from my local gun shop not knowing exactly what they were. Well I threw it into the pot, about 8lbs worth, then added about 2oz aprox of tin, just to get good fill out....
Those bullets look very close to my 200 RNFP`s from my RCBS mold. I use 5.5 grs of Red dot; and they shoot just fine in normal pistol distances. I do have to admit though my favorite bullet is my...
Forum: Cast Boolits
I just take mine out, and put them in a empty pill bottle with any top punches also. Works for me.
Forum: Cast Boolits
The locating pins WAS another problem I had, I did tap them into the mating block to make a tighter connection.The blocks are square NOW. Do you lubricate them? never did that either?
Thanks for all...
Forum: Cast Boolits
Thanks for all the replies gents. Looks like I need to invest in a thermometer. And not let my pot get down low. Guilty of both.
Forum: Cast Boolits
Boolits are dropping out of my .44 cal RCBS 250-K mold too small. I am running them after through a lee sizer, and some feel lose, and some feel more harder going through. Does anyone else have these...
Forum: Casting Equipment
Thats the one I started with, and still use. I like it. mine drips a little. but it is old.
I just love my Mod 14 S&W. Shoots sweet, and is easy on my pocket book. I got it for under 300.00. and was NEW in the blue box.
Forum: Leverguns
I think I got it solved. I gave it another 1/2 turn after loosening up the flat spring, and it seemed to stop? so I re-tightened the flat spring, and went to the range, and shot a box of 20, and not...
Forum: Leverguns
Does anyone know the correct way to adj the flat spring, for the hammer on a mod 94. It has a flat spring, with a strain screw? I think that is what that screw is next to the mounting screw of the...
Forum: Cast Boolits
A man has to know his priorities. your hooked now.
I think 629-3 is when they started putting the improvments into the cyl, and latch, and etc. The old ones I heard sometimes would skip, and come open with "Full House" loads.? Don`t quote me tough....
Forum: Cast Boolits
I`m looking for a good hunting bullet for my .44 mag with a wide meplat, for hunting wild boar. Between 250-300gr. where can I find a good mold? I`ll be shooting them through my S&W 629. I have a...
Forum: Cast Boolits
Tried the water trick tonight; and it worked good. Alot better than the wire brush method I had been using. Thanks for the tip.
Forum: Cast Boolits
Thanks guys; I`m trying Unique right now. It`s alot cleaner than before. I Always Do keep the muzzle up when ejecting. Old Habbit.
Got my eyes on 231, and uni clays for next time when this can of...
Forum: Cast Boolits
That was the problem!. I hit the range this morning, and my groups were back to normal, and no mis-fires.
44 Man; you are right; that was the first thing I noticed was my groups were larger than...
Forum: Cast Boolits
I went to the range today, and had three misfires. I did not know what was going on? I did see light dimplemark on the primer. They went off after a second try on all three. But I came home and...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |