They do this morning.
Type: Posts; User: 321BMT
Forum: Gunsmithing Tips & Tricks
Thanks. I've been watching Ebay for a couple of months and also https://usagunsandgear.com/ . I bought three model 10 4" barrels for an average of about $55.00 a piece including shipping. There's a...
Forum: Gunsmithing Tips & Tricks
My LGS ordered two of the J&G Sales Model 10 gunsmith specials. I intend to "build" a couple of carry weapons. I like the heavy barrels and I'll probably do one 4" and one 3". These guns are both in...
Forum: Gunsmithing Tips & Tricks
I'm going to cross dovetail a shortened model 10 barrel for the front sight. Some of the sights like Novak have a roll pin that is driven thru the sight blade into a hole drilled thru the slide to...
Forum: Gunsmithing Tips & Tricks
I just decided to go ahead and cut the barrel. I used a draw file to remove the lettering and some emery cloth to smooth everything out. After I get it cut and crowned I'll polish and blue. I'm going...
Forum: Gunsmithing Tips & Tricks
I emailed S & W. No 3" k-frame barrels. They suggested the usual suspects. Gunparts, Ebay, Gunbroker, etc.
Forum: Gunsmithing Tips & Tricks
I've been pricing the chemicals to do one of the DIY recipe's, and that stuff is not cheap. Enough to make up a gallon will over $50.00. With the rest of the stuff it's gonna mount up. That $95 price...
Forum: Gunsmithing Tips & Tricks
I live in the South so humidity is always high. I was thinking more like polishing this weekend and having to wait until next weekend to blue. The only guns will be handguns so I'll be using big pots...
Forum: Gunsmithing Tips & Tricks
You guys have a lot of experience in bluing so this may sound dumb, but I can't really find an answer. All the prep instruction I find ends with putting the parts in boiling water and then straight...
Forum: Gunsmithing Tips & Tricks
Well, I turned up my google machine to full speed, and I think I have resolved my confusion and concerns. There are different requirements under the Gun Control Act ( for regular guns) and the...
Forum: Gunsmithing Tips & Tricks
Thanks for your replies. I do intend it for personal weapons. The price for a good hot salts job on these guns is just prohibitive. Years ago I had a couple of friends who had small bluing...
Forum: Gunsmithing Tips & Tricks
Roysha, there are no regs that require any markings on the barrel. But there are a few things that must be on the gun. Some must be on the frame like the manufacturer, serial #, etc., and some that...
Forum: Gunsmithing Tips & Tricks
Does anyone know how many handguns you can blue with a quart of Dicropan IM? Model 10's, Star BM's, or similar sized.
Forum: Gunsmithing Tips & Tricks
Thanks for the replies. I'm putting out feelers. Somewhere there is a reasonably priced 3" barrel, but it's not showing up on line. I can't find one for less than $250. Decent model 10's are upwards...
Forum: Gunsmithing Tips & Tricks
Outpost you are correct. A factory 3" barrel would be the preferred route. I haven't seen one for sale in the last six months anywhere on line unless it had the rest of the gun still attached. Three...
Forum: Gunsmithing Tips & Tricks
I am considering cutting a 4" model 10 barrel back to 3". This will either split the roll markings or leave them well off-center. Neither will look very good. I thought about draw filing and...
Thanks for the replies. I'll work up to 10 grains and use that as a ceiling.
I have read that Herco is very close to Unique as far as charge weight to velocity - a little more Herco to get same velocity as Unique. Is the relationship the same for relative chamber pressures...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |