Search:

The first powder was given to me by a fellow A1C that was in EOD salvaged from .50BMG ammo. Tail guns on B52's. Gave me about 4 lbs. to reload my .30-06.
First powder bought was Hi-Vel #2. Used it...

Since my last batch of "Pine Tree Green" is almost gone,decided to make a batch of "Simple Green"
Pine Tree Green is 1 lb. of beeswax,a 13 oz. jar of petroleum jelly and 3 oz. of Amsoil 100:1,2...

On my 77/357 the boolits from an RCBS mould fit in the rotary magazine just fine. Great short range Coyote medicine.

Bought mine at a health food store,$7.00/half pound jar

The first load I tried in my 77/357 was 11 gr of 4759 pushing an RCBS 38-180Sil. 5 shot in less than an inch at 50 yds. Very mild. Have worked up to 15 gr H110 and 14 gr Alliant MP300,but with these...

I've found that cooling and reheating helps blend the grease into the mix.

Bought a new RX7 about a year ago,no colored granuals.
Tried some in myRuger 77/357. Book said 16-19 gr. 16 gr shot pretty good. 18&19 gr were stout.

Go over to Midwayusa and every Lee plain based bullet has a solution to putting a GC on a plain base. Each explination is,according to the one that submitted it,is done by a woman.
I can't...

Years ago,most railroad cars were "hot box" type. The maintenance crew would throw in a stick of lube. The lube stick was a stiff,black that had cotton fibers and as the "hot box" warmed up,the...

Back in the 1980's,I mixed my first batch of "Pine Tree Green". That was 1 lb. of beeswax,13 oz jar of petroleum jelly,and 2.5 oz of Amsoil 100:1,2 cycle lube. The color came from the 2 cycle oil....

Over in"Castpics" someone entered a load for a .357 Magnum,RCBS 358/180 Sil boolit. The load was 16 to 19 Gr of Reloader. I tried the Re 7,16 and 17 gr. The 18 gr was a little stout and the 19 gr was...

Shooting 4759 in a new Ruger 77/357.After the first shot is high and to the left,it settles down and will shoot 1" groups at 50 yds. I shoot the RCBS 357/180 Sil over 11 grains of 4759. The load was...

I am haveing the same thing with my 77/357 Ruger. Bullet is the RCBS .357/180 Sil. Lube is 1 lb beeswax,13 oz petroleum jelly and 3 oz Amsoil 100:1,2 cycle oil. I've used this lube since the mid 80's...

Back about 1985 or so I mixed my first batch of Pine Tree Green(hense the handle).Over the years,I've tried about everything that came down the pike. I'm not sure anything works any better than the...

One of those Ruger 77/357's followed me home yesterday. :D

Add me for a one cavity GC. I'm old and slow and a one cavity suits me fine.

Want list#21
I'm going to drop out of this one,since there are enough to make a GB. So scratch my name off the list. Thanks Don

I was looking over the Midway selection of LEE plain base handgun boolit moulds a couple weeks ago and noticed an odd thing in the reviews. If you read down through,you will find a female name and...

Emeril says "pork fat rules"

Put me down for a 1 cavity plain base,no hollow point

Could someone post a sketch of this GB as a plain base boolit.

Put me down for a one cavity,GC,no hollow point.

I had problems with a sprue plate on an RCBS mold. Called customer service and had a new plate in 4 days. NO charge.

The Lee 309-130 mold has been a good one in my.30 M1 Carbine barreled Contender. It cast about 136 gr. and with GC and lube run 140 gr. That all changed when I got a new 30-140 FN GC mold from LBT....

When I left the note the other day,I had not added the MS. I put it back on the heat and cooked it down a little more,then added the MS and now it has a label "Hershey's Select" since it looks like...