Search:

thx for posting the vids Bonz, sent Kevin a PM on it.

I was wondering the same and even with 28gr of BD I can barely get it to roll crimp to length and run thru my M2.

can't comment on the Pattermasters, but have had exceptional luck with the Blackbore chokes.

http://www.blackborechokes.com/

i wouldn't change a thing!!

I did a little of patterning with my Citori this past summer, more for skeet, but did shoot a few rounds of small bore trap with a Full choke. I run 3/4oz load of #8's with 14.3gr Universal (have...

Nice build, are those NECG front sights?

what's the speed on them?

John, it was the 2nd load with Fiocchi hulls and Steel powder. Used both T and F can't say as I seen much difference. I might switch to a Federal hull this year, they are a little deeper inside and...

used one of BPI's 2 3/4" loads and F on coyotes last year and it puts a hurting on them.

how did you fit up a Savage barrel for a 870?

like this http://www.midwayusa.com/product/214811/rcbs-cowboy-shellholder-12-gauge-brass-case

Ajay, what year was that artical wrote!!!

Ajay, what's the diameter of those bullets?

if your using a single stage Mec, hold the handle down for a couple of seconds on the crimp starter.

They look as good as factory, you might have to adjust your crimp cam a bit to close the...

I have had better luck with the 6pt vs the 8pt on new hull, but I sprung for the brass one from BPI and it sure does a nice job.

I'm with Turbo.

what lube and how are you sizing those slugs?

I stumbled across these awhile back, never ordered any, but might give someone an idea.

http://bullmooseproducts.com/index.php?main_page=index&cPath=7_9&zenid=c82ef876bff7ffba83aedeece120560f

Ed, what's the ID diameter of those 20ga SPW wads?

looks like the same one sold by Slugs-R-Us, which is plastic, which worked so-so for the few rounds I did with it.

Buy the BPI or the steel one from Precision Reloading, both work pretty slick.

how long did you have to wait for those brass cases from RMC?

Fed 209A and CCI 209m seem to be the hotter of the bunch.

Ajay, how did those 3" rounds with that thick card wad work for you?

PR has one, works like a charm.

http://www.precisionreloading.com/mm5/merchant.mvc?Screen=PROD&Store_Code=PRE&Product_Code=MM1816&Category_Code=PRIME_POCK_CORR_SHOT

Ed, where did you get that Fosbery type slug?

James, anything come out of your testing of those new powders?