Search:

I am looking for a supply of 358 diameter, 200 grain j-word bullets; preferably the Remington Core Lokt. Let me knnow what you have to spare and how much you want for them. PM or text to...

I found what I needed, Thanks for lookin!!!! I need 15 to 50 pieces of Frontier brand 7mm Remington Mag brass for a special project. Dig through your pile of brass and let me know if you can...

I just came by a S&W 610 at great expense. It is equipped with the Loupold M8 scope and has a 6" barrel. Now I need to get some molds so I can save enough on boolits to shoot it from time to time. ...

I have a 20 ga rifled slug barrel, complete with EGW base for $300. I will throw in the frame and stock set for an additional $10. Let me know.

I use salvaged primers and 30 grains of BLC2 under a 161 grain cast gas checked bullet to fireform my 30-30AI. These are good plinking loads, accurate, and produce excellent fire formed AI brass.

Short answer, Yes! You will need to shorten the 308 brass to slightly more than the case length you are seeking then anneal the case neck. Run them through the desired die then final trim to the...

I will take these; 36 pieces of believed to be once fired and 5 pieces of believed to be reloaded for a total of 41 pieces of 260 Remington brass for $20. Email your information to...

Delete ad.

Complete H&R SB2 with the Pardner Tracker II (Rifled barrel) in 20 ga. with 3" chamber. The frame is a late manufactured frame and this has a factory wood stock. I got the barrel from Denny and have...

I have a couple of Sharpshoot USA molds and would like to have one for #3 buckshoot. Does anyone have one that they would part with. BTW, does Mr Plank still have the tooling for these molds?
...

I have obtained a small quantity of 7.5X55 Swiss and reformed them to 30 RAR. I am awaiting the neck reamers but I believe this will work really well. These look good but the neck walls must be...

Thank you for your help. The 7.5 Swiss cartridge suggestion is excellent guidance and I believe it will work nicely. M-Tecs has simplified my life.

I am looking to the time when Remington stops production of their 30 Remington AR brass. It has an original case head size (.496) and I can find no other case that has this size head. The body, just...

NObamain2012, Starline does (or did in recent memory) make 223 Basic brass, I have a couple of hundred. Used it to make the 357 Max AR.

I just got this rifle and I want to get brass for it. If you don't reload I will buy your once fired brass. How do you like yours?

I need 30 Remington AR brass. Let me know what you need for it or what you need in trade for it.

Thanks,
DH

I have two RCBS Uniflow powder measures that I need to sell. These have been listed on Midway USA for $121 but are currently on sale for $85.00. I will sell these, shipped TYD, for $65.00 each. ...

I will take it. Please send address for payment

I did not particularly care for the AR rifles but I bought a Remington R-15 some years ago. What I really wanted was the AR rifle with the 30 Rem AR which disappeared. I would make one but the...

Hey, the HS-7 and Win 571 were the same powder in the late 70' and into the early 90's when it disappeared. It was my favorite heavy shot shell powder back then but lead was legal for ducks when I...

I managed to find a 1# can of HS-7 and a 3# can of Winchester 571 last week. My pistol/shot shell habit is good for a while

New Year's (almost) bump. Somebody buy this rifle. I need to remodel my bedroom, not my doghouse.

Y'all may have covered this but lubing the inside of the case neck may be required. If the mil spec brass is hard/brittle the expander ball may not slip out of the case without extreme difficulty. ...

The percentages listed is what I was given, I did not check the math. Apparently the "Linotype" I have is rich in tin. I'm just trying to use what I have on hand. Seeing what I have in my stash,...

OK, I got my lead supplies tested and have basically 4 groups of lead and I need to calculate how much of each group I will need to mix to get to a specific alloy. I have one batch that I call lino...