Search:

Been waiting over 3 months for my .41 magnum brass. Maybe someday.

I waited over a year for an order that never arrived before finally receiving a refund. Needless to say I don't use them anymore.

Got my .461 from Lathesmith.

Put the rifle completely on bags and shoot. Using the bipod and holding to your shoulder, you will never be able to hold perfectly steady and achieve optimal groups. My opinion.

55gr BTHP w/ 25.0gr H335 in my 18" 1-7 twist AR carbine is a beautiful thing.

LA

(Lower Alabama)

A number of lawyers have a flat fee for drawing up wills and estates ($500 from my local attorney). $300 an hour with no cap is excessive to say the least.

You need to adjust your dispenser farther down into the bushing connecting it to the LNL press. Screw it down farther until the drum rotates to the top when you raise brass into it fully. Simple...

Silly question: What are the bore and groove depths for your Marlin? Have you slugged the bore and measured? You will need these measurements if you are going to order a proper fitting mold from...

314299 sized .314 22.0 grains IMR4198.

Just to elaborate, this is what Tom's molds produce: Left-to-right 31-185S, 36-310P (38-55 paper patch) and 44-500P (45-70 paper patch).

259318

I have a number of Tom's molds and everyone of them is a quality piece of work. They are my favorite molds to work with and drop perfect bullets every time. I highly recommend Accurate Molds every...

These are the times that test a person's character.

Smelt, cast, load, shoot, rinse, repeat...........

The girl may be ugly but she is a damn good kisser. I have an RPR in 6mm Creedmoor and it puts 5 in the same hole at 100 with my loads. Haven't really find a load that shoots worse than MOA.

RCBS 243-95 sized .244 with 17gr RL-7 in a Ruger American 243 does MOA at 100 in my tests.

Promises, promises

I too have had transactions with your Dad and must say he was a standup guy. My sympathies for your loss.

PetMountain.com. They had various sizes available which handle 9mm, 30 and 45 among others.

Works with everything.

I use the Mr Bullet feed die in 5 different calibers and they work like a dream. I do NOT use their feeder. Instead, I use a simple setup of rigid aquarium tubing and PVC to reliably feed bullets...

Just put me in touch with the seller and I will handle this. I hate to see you worrying about it.

Ed hangs out over at https://castbulletassoc.org/forum.

Over on the Cast Bullet Association site, there is a fairly extensive thread detailing members ventures down the .243 cast rabbit hole. There is a lot of valuable information to be found there. I...

Handloads.com shut down a number of months ago. Owner shut it down and would not let anyone else buy it or take it over (I tried).