Thanks for catching that T-Bird. Made the correction. It's such a long way between that PC between the ears and the fingers anymore.
Mk42gunner:
I can surely identify with the frugal and...
Type: Posts; User: R. Dupraz
Forum: Leverguns
Thanks for catching that T-Bird. Made the correction. It's such a long way between that PC between the ears and the fingers anymore.
Mk42gunner:
I can surely identify with the frugal and...
Forum: Leverguns
Mk42gunner:
Those Marlins are fine rifles. I have been using a Marlin 336CB regularly with cast for lever action silhouette for at least 15 years. The cast bullet problem is typical with these...
Forum: Our Town
That was definitely a scam!! It sound like some where in the past they were allowed into the PC. or gotten access by way of a scam phone call. Get it cleaned.
I have received similar scams on this...
Forum: Factory Rifles
A fast twist 6mmx223
Any where from a 60 -105 grain bullet
R.
Forum: Black Powder Cartridge
Deprime and dump fired cases in a jug with a 5o/50 mixture of vinegar and water after the match.
Shake well when at home.
Rinse with Dawn and water and hang cases in a drying rack
Tumble or...
I'm with mattw's suggestion on this one without a doubt. Being a cast bullet bench rest shooter, I am have an obsession with details and Saxguy's (weet) method for lapping molds produces. A few days...
Forum: CB Loads / Military Rifles
While 5744 is a popular powder that is used for cast bullets in these old military rifles, it is not the only one. If you want to develop some accuracy cast loads for a military surplus rifle, the...
Forum: Black Powder Paper Patching
I will second the replies from both "Lead Pot" and "D. Mc Dowel".
Back when I decided to try PP in my Shiloh 45x2.4 Sharps, I ordered a 540 grain PP mold and patching paper from Buffalo Arms....
Forum: Case Forming / Re-forming
Excellent thread and link to Rick Averill's Lapping Reloading Dies. Thanks for posting that link EDG. I am a cast bullet bench rest shooter and have used Averill's method almost exactly to lap out...
Now you can do what you want but under no circumstances use a wooded dowel to hammer a lead slug through a rifle bore. Why you ask? because it's likely that at some point the dowel will break and...
Forum: Gas Checks
That's why I don't use a push through sizers to seat GC's
Forum: Cast Boolits
"Also should I reduce the powder amount as I reduce the OAL? I am at 4.1 grains of W-231 over a Winchester small rifle primer in Winchester cases."
A "resounding definite "yes" !! At least do a...
Forum: Black Powder Cartridge
Thundermaker:
I have a 45x2.4/45-90 Shiloh Sharps "74" that I used to compete in BPC mid range, silhouette and long range gong 1000 yd. matches. mostly long range gong. And have seen the 45-70 do...
Forum: Gas Checks
An easy simple technique to start with is to size the bullet just enough so that it will slide with some resistance into the mouth of a fired case and see how it will shoot. Generally, the best with...
Forum: Muzzleloading.
I use to build custom muzzle loaders for several years and used reproduction parts from venders that made the appropriate castings for the particular rifle. And have been faced with this problem. It...
I probably load and shoot a thousand cast loads, give or take, through the 9mm pistol a year. And I know that you asked about load data with your powder. But there are some things that are unique to...
Forum: Casting Equipment
You need the NOE push through sizing kit and then the appropriate push rod and bushings that are needed from then on. The initial cost is more than the Lee but after that, just the relative...
Forum: Factory Rifles
I don't post much here but from one who has had 27 years in LE will offer the following. I see this kind of question appear on various gun forums from time to time and the only sensible answer is to...
Back in the day Weaver made scopes for other retail stores, such as Sears and Robuck and others. My guess is that it's one of those Weavers made for someone else. MICRO-TRAC IS definitely a Weaver...
Forum: Casting Equipment
Even with all the comments regarding NOE molds I felt compelled to add. There are a number of AL's molds here and I have had complete satisfaction with them all as well as with his customer service....
Forum: Single Shot Guns
Thanks for the update and range report. I know of several shooters of which I am one, who have been anxiously awaiting to get their hands on the new Henry. It's good to know that all of the hype has...
It's good to follow the manufacturers directions. However, All I do with new aluminum NOE molds, I have accumulated a number over the years, is to boil them in a SS pot on the gas range in Dawn DW...
Forum: Reloading Equipment
I have been using a Hornady L&L AP press with their case activated L&L powder measure for quite a few years now. The measure is all metal with no nylon parts and is accurate, reliable and trouble...
Forum: Muzzleloading.
Another reason for safety glasses, always.
Especially with ML's
Forum: Lead and Lead Alloys
Copper wool and solvent on a bronze bore brush. If it's lead, it will come out.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |