mine likes boolits sized at .270
Type: Posts; User: krallstar
Forum: Case Forming / Re-forming
Got my tempilaq today. painted 6 pcs. Ran thru and adjusted till i got the right cycle on my annealer. Turns out my speed needs to be set at 60.
Forum: Case Forming / Re-forming
I tried to get it red hot to see if i could. 10 seconds with the center blue flame almost touching the neck and shoulder junction, never saw a glow. ordered some tempilaq.
Forum: Case Forming / Re-forming
This is the one i bought. https://www.lowes.com/pd/BernzOmatic-Soldering-Propane-Torch-Kit-14-1-oz/5014236237
Forum: Case Forming / Re-forming
I did that. I am in the basement so real easy to get dark. I deliberately slowed it down to get a piece red hot and couldn't get it to glow.
Forum: Case Forming / Re-forming
I built an annealler and it seems to function fine. The problem i am having is i can't get the brass neck to glow. I am using a brand new propane flame pencil torch and have gone from almost stopped...
Forum: Frequently Asked Questions
Anybody else get this. When i try to use the search feature this pops up at the top of the screen, This form will be sent in a way that is not secure. Are you sure you want to send it?
Forum: CB Loads / Military Rifles
My 303 british has a .316 throat. Have you slugged your barrel yet. Seeing that Powder is so expensive now. You might want to leave your PC boolits as cast and coated.
Forum: Cast Boolits
Great, Thought i read something about the cut ring.
Forum: Cast Boolits
I am making 7.62x40 brass from LC 223 for ar15. The specs call for a neck length no longer than 1.570. i measured the throat using a sized case. Cut most of the neck off. Then cut another small...
Forum: CB Loads / Military Rifles
How bout this. https://noebulletmolds.com/site/shop/308-311/309-146-sp-h2/309-146-sp-h2-5-cavity-gc
Forum: Lead and Lead Alloys
I hear you can put them in shotgun shells when shtf
Forum: Military Rifles
Anybody use these FM Products Premium Match Grade nickel boron 2 Stage Competition AR-15 Trigger Group $75.00
Forum: Cast Boolits
Measure the inside neck of a fired cartridge, that should get you close.
I used a file on the bottom of the handles so mold would sit on factory flat side of handles. Worked fine
Forum: Reloading Equipment
I know it's over kill. Braces every foot 241071 First build. Wanted to make sure it lasts a long time. I plan on adding a 3rd post leg, front and rear. dead center
Forum: Reloading Equipment
I have a rock chucker as my main press. And i also have a lyman 6 hole turret press. I use the turret for a Lee uni decapping die and a Lee expander die. The other 4 are for various neck belling...
Forum: Reloading Equipment
240965progress so far. 240964240962240963
Forum: Reloading Equipment
I am also doing 3/4x2x8. Question about the glue and screw. What glue do you all use, and how far apart are you placing the screws
Forum: Military Rifles
I am also wanting to scope my 91/30. Has anyone used a https://jmeckscopemounts.com Thinking i might go with this setup.
Forum: Cast Boolits
Gamsek, What mold is the last pic, And what weight. The three shiny HP ones.
Forum: CB Loads / Military Rifles
Measure the inside neck of your fired cases. That will tell you how big the neck opens. You want a lead boolit about that size. My Brazilian 1908 7mm uses a boolit sized to .288 to fill the throat.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |