Search:

I have a duel fuel oven / stove. The Kitchen Aid range is gas and the oven is electric, my wife loves it.

Thanks for the above info.

I just bought a Lyman 454 424 single cavity hollow point mold for $20. I can't wait to cast these. I have't been able to find info on this mold yet.

Rip

I check every .30 carbine case. It takes a lot of time but needs to be done.

Interested,,more info please.

Lasting a few years should not be a problem. I have two "Ohio" pro melt pots. These were made before RCBS bought the rights to mfg them. You can set several ingots on top of the pot to preheat them....

In the past Iv'e used spent primers on top of the lead core. I wasn't able to recover any of the 40 cal bullets so I have no idea if they expanded as I expected.

chuckbuster "Ultimate Cannelure Tool" I don't know if he still makes them. I own the wide model #091 with additional tooling.

No They have several styles and sizes to chose from.

I use Harbor Freight cases.

Great price,, looks really nice. I got to dig out my old stick.

When I first started out casting/lubing lubing, I used a metal plate under the lube press I bought a cheap travel iron from a 2nd hand store for heat. That served well for many years.

If you still have the equipment dust it off make them and shoot em! I personally cast more than I shoot. I enjoy the hobby of casting my own.

Iv'e been remodeling my house room to room for about 4 years. I recently found a frozen "pretzel box" and looked inside it. To my surprise I found 10k of primers in the box. The price on the boxes...

Another for Hornady one shot case lube spray! it makes sizing effortless.

I do them by head stamp. I weigh each one and core together add lead shavings before core seating to get my desired weight.

Looks really good in that last picture.

I've rebuilt several old lube sizers. That looks like a fun project , good luck with it. Post pictures when you'r done.

Back in the day (California) my Dad got my brother a Remington .22 rifle with "green stamps". I have that rifle in mint condition in my safe.

I've had problems with Allstate in the past. Shop around and find a better company.

I just got done doing about two thousand jackets and was out of acetone to clean the lube off the derimed cases. I wanted to see if I could skip Brian's first list step #3 and #4and go to annealing....

I mounted a "lab jack" 4"x 4" to the base of my pro melt. I can adjust height of the mold in seconds. The heavy Hensley & Gibbs 8-10 cavity molds are a piece of cake with this mod. I also use the...

My old Ohio Pro Melt is still working perfectly. RCBS bought the rights to make it under their name long ago.

RIP, I'll have a Margarita today.