Search:

Edited to add a .200" meplat.

Here's my thought:

A .340 copy of the 35 cal 310 Thumper. Need all the shank in the neck, and a nose .785" for a COAL of 2.800" for the 338 Federal. This will need a crimp groove as well. Thanks...

Any guesses on whether the NOE 311-122-FN-J4 would feed in an M1 Carbine?https://noebulletmolds.com/site/shop/bullet-moulds/308-311/311-122-fn-j4/311-122-fn-j4-2-cavity-gc-brass/317555

No, as all my rifle charges get thrown with an electronic scale. I run the NOE Expander in place of the regular belling die when running pistol rounds through my progressive. Just replacing one die...

NOE pistol expanders have a shorter nose, which is needed for the shorter cases that most auto pistol cartridges have. They might bottom out in the case, otherwise. I have 21 NOE expanders (and...

Search hasn't given me any answers that I can find. I'm curious, since I can't seem to find wheel weights in my area anymore. I know Full Lead Taco has done testing, but has anyone gone down the...

Was looking at that too, but I'd like a bigger meplat. I guess once I have a few samples in hand, I can see if they'll feed from a mag or not. Thanks for the reply, tazman :-)

Has anyone tried this? If someone could donate a few bullets (10 or so) for the cause, I'll see if they will allow feeding and report back. My platform is the Sig P320 and P250. Thanks gents!

Kevin

Outstanding Sir!

They don't have any listed in 308. Bummer.

So do you guys think the Turk action is up to 308 pressure levels? I'm wondering if it wouldn't be better to just bore out the action threads and re-cut them for a small-shank Savage pre-fit barrel. ...

So you have personally done this? Would you be willing to do it on a couple of actions if I could find a donor take-off barrel?

Kevin

Makes perfect sense. Just didn't know if anyone had done it or not.

Thank you,

Kevin

Or how about boring out and re-threading the action to receive a large-ring barrel? Just thinking out loud here, as I've never heard or seen this done before. I've got 4 rifles to do, so if anyone...

...to small ring diameter. I'd like to outfit a few Turks I have with 308WIN barrels, but I can't find anything economical in a small ring offering. I guess I have two questions: one, can I turn the...

Great work Jmorris!

The casehead only makes contact on the outer part of the wheel. With only partial contact on the casehead, it naturally spins.

Kevin

Figured you did. Total time on mine is about 12 seconds or so, but the case only sees one torch flame at a time.

Kevin

Thanks! I use the stainless steel pins that came in the kit. They won't work in a vibratory, and are for use in a wet-wash media setup. The other side benefit of this system is that there is ZERO...

I'll offer the cleaning and annealing service to you guys for .10 a piece. It takes me approximately 3 hours to clean and anneal 200 medium-sized cases.

Kevin

My Model 400's rate of dwell is fixed with the turntable speed. You adjust the amount of annealing with torch heat.

Kevin

That's the one Matt!

Kevin

Did some account organization after I posted. The links should work now. Sorry for the inconvenience.

Kevin

I'm having no problem seeing them; is anyone else having problems?

I understand Photobucket is offline for the moment. I can't upload the pics from my computer, as the file is too large. Sorry fellas.

Kevin