Compared a few powders today more to solve my own curiosity, but figured I’d share as maybe others might find it useful.
The boolit used is from a modified Lee 358-200. I machined the top of the...
Type: Posts; User: moto357
Forum: Cast Boolits
Compared a few powders today more to solve my own curiosity, but figured I’d share as maybe others might find it useful.
The boolit used is from a modified Lee 358-200. I machined the top of the...
Forum: Cast Boolits
Almost forgot, velocities we’re hovering right at 2000fps on this load
Forum: Cast Boolits
Finally got back out. As to the paper patching, I seated the boolits a hair deeper so the leading edge of the paper didn’t catch as a few did the last outing. Using the Lee 358-200 cast of 20:1 and...
Forum: Cast Boolits
I’ve been PP’ing my Maxi for years, and typically use a 30:1. My challenge has been the difference between the maxi being a single shot vs my legend being the AR platform
Those lee boolits I used...
Forum: Cast Boolits
Good news/bad news. The good news is I got some to shoot. Bad news is most of what I had loaded were from a mold I made, and I had them seated a little long. Those loads caught the edge of the paper...
Forum: Cast Boolits
267141
Might as well see if paper patch works in an AR.. just because I can
Forum: Cast Boolits
This has been a fun thread. I’ve recently acquired my first AR and it’s a 350, because I love 35’s and especially my Max. Trying to keep this one a strictly cast shooter. The only boolit that feeds...
Forum: Completed Deals
Got this on a trade, never really used this one. As cast with 30:1 boolits are about .453 and weigh in at 390gr. When I tried to clean it up for pictures it seems the original black coating was...
Forum: Smokeless Paper Patching
:cool:I have my own reasons for PP boolits. I'm a bit of a do it yourselfer. And I wanted to make my own bullets, but not have to drop loads to typical cast boolit shooting. My answer was PP, plus...
Forum: Smokeless Paper Patching
Still consider myself new to this PP thing. I feel like I got sorta lucky last year finding what worked for me. This is all in a 357 maxi. The alloy I was using last year was about a 30:1 mix, and I...
Forum: Smokeless Paper Patching
Shot the gun again yesterday, but with the cold and wind I wasn't to enthused about spend more time playing with my pp loads. For the heck of it before I left I shot two. This boolit is from a mt...
Forum: Smokeless Paper Patching
This is that sight I mentioned, not smokeless but interesting. I especially like that he gives chrono results for a few loads at the end....
Forum: Smokeless Paper Patching
My guess is that it went down the barrel like a piece of dough rolled between your hands, making it longer and skinnier and thus seeing the rifling marks on the side it rode down
Forum: Smokeless Paper Patching
That's how my cartridge guns work as well, bit being a ml I need to be able to load them. After going through my .451 die they come out just shy of .452 and load snug but don't tear the atch. This is...
Forum: Smokeless Paper Patching
After being bit by the PP bug this year, I keep thinking of new things to patch. I've always loved muzzleloaders and had a number of smokeless ml's too, and always wondered if PP would work with...
Forum: Smokeless Paper Patching
Curious what others experiences have been with different lube, or even no lube?
Here's my limited experience: first time trying PP was a few years ago in a 45 colt rifle. Used tracing paper...
Forum: Smokeless Paper Patching
My goal was to make something usable and as simply as possible. Especially considering I'm new to paper patching, it was just an excuse to go make something in the garage. After some promising range...
Forum: Smokeless Paper Patching
You make it sound so simple. Don't know why I didn't think of just moving the stem down in the body! Thanks CJR
Forum: Smokeless Paper Patching
Old Coot,
yes I'm using a flaring die but I would suspect its plenty more than .005 that I'm going.
CJR,
1. RCBS 38 dies. The seating die stem does not reach anywhere near where the paper...
Forum: Smokeless Paper Patching
Sorry to keep asking so many questions, but I have another. When seating the boolit I'm pressing in as far as I can by hand, then sending it up into the die. Sometimes they come out perfect, other...
Forum: Smokeless Paper Patching
Finally got another day at the range. My time in the reloading room didn't feel as it went quite as constructively... still learning this PP stuff! I have a few questions maybe some of you with more...
Forum: Smokeless Paper Patching
The offset was just to give myself more room, no function to it though. If the brass rod I had was even just 1.5 instead of the 1.25" I would feel more comfortable. Everything just seemed so tight...
Forum: Smokeless Paper Patching
The last photo is the reamer I made, the bottom edge is the cutting edge. Its basically the nose profile and the widest part ends up cutting the boolit body as I run the carriage in/out.
143809...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |