Load
40 sw
Lee 145 grain tc
Brass mixed
Win 231 powder
Oal 1.090
Hello occasionally I am getting jams in my walther ppq pistol with the above load. When it happens it appears that part...
Type: Posts; User: waltherboy4040
Forum: Cast Boolits
Load
40 sw
Lee 145 grain tc
Brass mixed
Win 231 powder
Oal 1.090
Hello occasionally I am getting jams in my walther ppq pistol with the above load. When it happens it appears that part...
Forum: Cast Boolits
Hosed off my scales with brake cleaner.
Forum: Completed Deals
Looking for
338 win mag dies
338 win mag brass
338 win mag bullets
weatherby vanguard scope mount
hornady pistol measure bushings
Have brass like 3006, 303 british, and others
or...
Forum: Reloading Equipment
Well I backed off the decapping rod, re-adjusted the die, adjusted the shell holder, and used a little bit more lube. I'm not sure what fixed it, but its working great now. I'm thinking maybe I had...
Forum: Reloading Equipment
Checked the case in both of my lee shell holders and they both seem lose. Does anyone have a recommendation for a tighter shell holder?
Forum: Reloading Equipment
Using a lee single stage, lee shell holder, lee lube, and rcbs small base dies. On some of the remington cases I'm getting getting bent rims on one side of the case. How do I stop this? I followed...
Forum: Reloading Equipment
I picked up a rusty rcbs uniflow hopper at an estate sale that was completely seized for eight bucks. I have it all apart now still soaking in vinegar. My questions are about caring for it after...
Forum: Reloading Equipment
Both have great warranty and customer service. I would go with lee.
Forum: Casting Equipment
Gallon of white vinegar is cheap and effective
Forum: Reloading Equipment
Maybe a home made powder through die for batch loading.
Forum: Reloading Equipment
Try white vinegar, its cheap so you won't be out much money.
Forum: Reloading Equipment
I believe you can upgrade to this version http://www.midwayusa.com/product/443978/redding-case-trimmer-titanium-cutter-and-shaft. I'm assuming your shaft holds the pilot then had a slot for a flat...
Forum: Our Town
Seemed like their selection of stuff kept getting smaller and the employees were horrible to deal with. My local one turned into a giant clothing store with sporting goods stuff, they won't be missed.
Forum: Reloading Equipment
Very cool, I'm surprised there isn't more options for automatic powder tricklers.
Forum: Case Forming / Re-forming
I tumble them, then store them in yellow 5 gallon kitty litter buckets.
Forum: Cast Boolits
I do the same thing along with bad brass, I'm hoping to trade it for lead.
Forum: Cast Boolits
I like the lee 145 grain tc bullet, only downside is it comes in the two cavity version. No excessive leading in factory barrel so far.
Forum: Our Town
Yes, it doesn't seem as bad though right now.
Forum: Cast Boolits
Would hs6 or 231 be better for cast bullets in 9mm, and 40sw? Bullets that I will use are lee 125 356 2r, lee 120 tc, and lee 145 tc. Goal is close to max range plinking loads, thanks for any help.
Forum: Casting Equipment
Try adding a nut to the top of the threaded rod, seems to keep it straighter and aid in seating.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |