Search:

I used to have a .177 LEM mould, could never get them to shoot in my spring powered rifles but would be interested to try them in my pre-charged rifles. Unfortunately I sold it before pre-charge was...

The F in Pentagon mark would suggest a German made barrel for a rifle not exceeding 7.5 joules muzzle energy.

I've had very good results with rust bluing on carbon steel blades.

A nice Remington 1100 LT20, well used but runs like a watch after a good cleaning. Now on the lookout for a set of 20GA tools for my Pacific 360.

Interesting, mine just looked roughly finished. I built the ally one with a 3deg slope on the tube. There's an M8 threaded hole in the base which will allow me to add a base to adjust the height if...

Nice one, steel or ally?

I can do blued but dread to think how long it would take to cut from a solid bar on my Myford, case colouring I can't do sadly.

I didn't, just polished and deburred. The Lyman one is just rough inside.

I made this recently to replace the nasty plastic Lyman trickler I own. It did the job but this just does it nicer.

It is turned from a solid aluminium bar with brass bearings inserted before the...

Well, this one is mine and seeing as it is on my licence I'm not right fussed about who knows I have it.

Fazakerley No4 Mk1

179867

Likewise, it looks like the arrangement on my BRNO.

That's a beautiful little side by side, I'd love to add a nice one like that to the cabinet.

Would you consider doing a build thread for the case when you make it?

One of these is on my shopping list when my licence comes back from renewal.

I've got a Sako Quad in .17HMR, it's an excellent rifle that has taken many rabbits and a few foxes but I wouldn't hunt squirrels with it. A miss at a high angle isn't a risk I would take. My BSA S10...

I've found that NOE will post to the UK by running through the order process online, not had a reply from either of my enquiries though.

Thank you gents, I have enquiries in with NOE and LBT to see if they will deal overseas.

I've been using the .312 Lee 185gn mould, beagled out to .314 and then powder coated on top for lubrication and a diameter at the widest point of .316 and then at 90deg they measure .314. I've...

Lee neck trimmer?

There are plenty of gun owners in France, from memory the main restriction is on military chamberings.

I might have some Herters dies kicking about, give me a couple of days to have a look. In the meantime if you've got links to any pictures of the parts you are after that would be a great help.

The top one looks like a Lyman Easy (or Ezy) with the charge bars, top cover and bottles missing, the bottom one is a new one on me.

I might have known you were on here! I've just dropped you an email.

I think I've got 4 scattered about, three for shotshells (Lyman Easy, Redding #16 and a Pacific 366) and a lone RCBS JR3 that I load my .243 and .303 on.

It's the .303 that has brought me back...

I made my own for .410, I used the diameter of an open shell for the outer edge of the 'roller' and the inner diameter of a factory rolled shell for the diameter of the 'island' in the middle of the...

You may find this interesting.

Rich