Lee Tumble Mixed With MEK
A mixture of Lee Tumble Lube and MEK was applied to the aluminum foil and the solution allowed to drie.
The powder coated bullets could be easily removed from the foil with out tearing the aluminum foil.
The mixture was about 10 to 1. 10 parts MEK and 1 part Lee Lube.
MEK was used since it eveporates very fast, acetone could also be used.
The bullets were bevel base and the bullets can go straight to the Lee Push Thru Sizing Die.
it only takes a few minutes for the MEK to eveporate, the coating is a very thin coating of the Lee Tumble Lube.
Pictures Below