-
bollits for turk
I realize this is an old thread, but here goes. My turk mauser slugs at .313/.324. I'm not set up for casting, so I want to buy cast. What i have seen (at Montana) has .324 as the largest diameter. Assuming the boolits need to be a few thousand over, where would I get boolits in .325 or .326?
-
Anybody who cast boolits. Just ask the supplier not to size the produce, and demand that the minimum diameter be 325-326 out of his mold. ... felix
-
We have the two group buy molds that if I remember correctly drop at .327"/.328"
I think they run about 230 and 250gn.
We have other designs but I am not sure if they will drop that large in diameter.
-
I have a $50 turk that has only one issue and thats the boolit dia,it will shoot all shapes and weights with any type of powder from shotgun to 50 BMG but only if the dia is over .325. Pat
-
Dittos on the Lee 175grnr. I size to .323 with necksized Rem. brass and primers powered with 18 grains of 2400 I am getting 5 shot groups under an inch at a hundred.