Originally Posted by
country gent
I have seen and made several portable reloading benches for apartment use that worked well. Most set them beside a table and used the table to hold the loose stuff and the stand for the press and powder measure. I hade one made up that would fold into a 8" X 8" X 48" rectangle to store in a closet. You sat on it adding your weight to it for stability. I sat it up beside a table or bench and used the bench for loading blocks brass components and little things. The portable bench had a press mounted and a powder measure stand on its top. Worked well and allowed for loading at the range or other places. This was made up from 1" square tubing and heavy wood. You can mount your press to a 2X8 and clamp it to a heavy table top with c clamps. a layer of felt or cork on the under side of the 2X8 and some scrap under the table top to stop marring saves problems later on to. Make the bord long enough for the press and a powder measure to mount on.