I like civil war carbines. So many are in .52 rimfire. Dixie make cases.
Does anyone use these. What was your results. What is your opinion.
Thanks in Advance
Printable View
I like civil war carbines. So many are in .52 rimfire. Dixie make cases.
Does anyone use these. What was your results. What is your opinion.
Thanks in Advance
I use adapters to shoot my family of .32 Long rimfires. They work just fine. Only tip I have to offer - I use 6mm "acorn blanks" in the adaptors to light the fire, instead of .22 blanks or Ramset-tool charges. Much, much easier to decap after firing. www.gundogsupply.com has 'em. A bit more expensive but worth it.
My loads are all smokeless powder. In the big CW .52-size shells you might best stick to the Holy Black. Did those use a heeled bullet?
My .52's a muzzle loaders.
Recently been experimenting with the Lyman/Ideal #533476. Was surprised with how well it swaged down to .519 diameter.
Attachment 252114
If you're so inclined I'd be interested also in what kind of boolits you're using in your carbines.
I am not to that point yet. I am looking at different carbines. I am partial to the Triplet and Scott. I know that I wont be able to use the magazine to its fullest extent. I will have to position the cartridge with the right place under the hammer.
I can’t help you with your question but I dig a bunch of .52 cal civil war bullets metal detecting
Its amazing how much history is inches below our feet. There was a really interesting show in Britain called time team. Almost every episode was fascinating.
I'm not familiar with the Triplet & Scott but you indicate it's a repeater. I'm wondering if it is possible to make up a new breech block to convert it to center-fire like the Spencer. If so then you have to find a suitable case to use but that problem should be easy enough to solve.
Just my $0.02 worth.
https://guns.fandom.com/wiki/Triplett_%26_Scott_Carbine
Weird design. Innertube sources mostly say it was made for the .56-50 Spencer cartridge.
I think it is really interesting. If you made it a centerfire, then 56-50 center fire would be the way to go. But I wouldn't want to so highly modify an original gun.
Agreed. Especially that one. Can't be more than a handful that have survived.
It appears to be a twist barrel type where you turn the barrel to the side eject the empty then turn it still farther and load a cartridge from a tube magazine in the butt. I saw a similar one 30 + years ago that was made by Parker & Snow? It appears you will be shooting it as a single shot. I too would be hesitant to modify it. What a fun and interesting carbine.