Since the first of the year I've picked up two new Uberti's; A Frisco in 45 Colt and a Flat Top in 44-40 to which I fitted a .44 Special cylinder. Since acquiring both of these, I've shot lots of cast bullets through them and they've both proven to be quite accurate.
The Frisco's timing was a wee bit off with the bolt popping early, but a Wolff bolt/hammer spring cured that. I also honed the forcing cone to 11°. I've shot the snot out of this revolver with everything from loads that duplicate the original, to 285 gr. SWC's close to 1000 fps. It love's 'em all.
http://i60.photobucket.com/albums/h6...pswpbjdqcv.jpg
http://i60.photobucket.com/albums/h6...psu8vis71f.jpg
http://i60.photobucket.com/albums/h6...ps00czqpf1.jpg
http://i60.photobucket.com/albums/h6...psc5kix4z8.jpg
Then along came the Flat Top. I fitted the .44 Special "tight" leaving a small BC gap, honed the forcing cone and installed a Wolff spring. It has been such a joy to shoot and I'll probably use it this deer season.
Shot these first two this evening-
http://i60.photobucket.com/albums/h6...ps8x0gkhqp.jpg
http://i60.photobucket.com/albums/h6...pszytfuls2.jpg
http://i60.photobucket.com/albums/h6...ps6pa2s0yo.jpg
http://i60.photobucket.com/albums/h6...pstiwz7ci5.jpg
http://i60.photobucket.com/albums/h6...psg62g7mm1.jpg
35W