Printable View
Two part question please.
1. Will the Hornady LNL powder measure with levers and powder thru die fit the Dillon 650 shell head and operate on the machine?
2. I cannot find the progressive LNL powder measure as packaged for progressive reloading ... cannot find that for sale at Grafs nor Midways. I only see the regular Hornady manual operated bench powder measure. Who sells the complete Hornady progressive powder measure with all parts so I can use it on my Dillon 650 ?
Thank you
LNL powder measure works fine on Dillon presses. Vast improvement if you ask me!! I don't believe you can buy the powder measure and the powder die and linkage in one unit. You have to buy Powder measure and then buy the Powder Die/Linkage unit separately. See links below.
http://www.grafs.com/retail/catalog/...productId/5946
http://www.grafs.com/retail/catalog/...productId/5945
You may want to add a PTX setup if your going to be wanting to flare at the same time like on the Dillon. The also have a upgrade that makes the flaring on the powder measure a little easier to manage.
Good point Colorado4wheel! However, I strongly recommend this PTX:
http://www.powderfunnels.com/
Much easier to adjust and only need this one PTX for all cases from .30cal up to .50cal