Duke hate to do it..... But please remove from this buy.
Thanks
Printable View
Duke hate to do it..... But please remove from this buy.
Thanks
Sorry to see you go, but OK
Quote:
Originally Posted by GoodAlloy
Need to remove, just got one off his page
I don't see where you were ever in on this group buy. Or, did I miss something?
Quote:
Originally Posted by evoevil
I'll bite,
4-cav HB w/pins - sorgatzatameritechd0tnet - zip 48442
Thank you. Added.
Quote:
Originally Posted by Lakehouse2012
Just looked at a few of my recent purchases from MP-Molds. The allen screws are in the mold blocks, and facilitate the attachment of the handles. That is what the allen wrench (he includes) is for. Sorry for the earlier confusion about the allen wrench.
So, in addition to the mold, Miha also incudes:
1) A allen wrench for installing handles (handles are sold separately)
2) Top Punch for pushing the mold through the lubricizer (others charge for that top punch, Miha includes it!)
3) Small sample of high temp mold lube. I use it on the mold pivot pin, and wipe some on the underside of the sprue cutter plate, and also on top of the mold <after cutting sprue, but before dropping castings> to help prevent "soldering" of lead on the cutter and mold. It's very similar to what used to be sold as "Bull Plate Lube"
Quote:
Originally Posted by jethunter
Please follow given link to purchase your group buy mold.
Once you will click the link you will have to insert a password. Password is case sensitive.
Password is :*********
(for password see your e-mails)
Now you will be able to purchase the mold (and other stuff)
link to 4 cav molds
https://www.mp-molds.com/product/mp-...4-cavity-mold/
link to 2cav molds
https://www.mp-molds.com/product/mp-432-hb-wc-2-cav/
In any case of troubles, please feel free to contact me (it is new platform after all)
UPDATE: Miha got right back to me, and perhaps "fixed" it... I then retried (using Opera) and it seemed to work. I was able to send funds with PayPal and got acknowledgement from them. So, it looks like it's good to go! (I ;)) hope.
geo
PROBLEM! I received invoice, and tried three different browsers to try and make payment for my mould plus one set of handles. No-go for me. I sent an email:
SIR: I attempted to purchase/pay for this mould and one set of handles. When I get to payer information page, the screen blinks on and off, and I am unable to add any (my name, address, etc.) information. I was using Opera, and thinking the browser may not be compatible, then tried Mozilla Firefox with identical results. I then tried Internet Explorer -- and still could do all UNTIL I tried inserting my name, address, and other information.
I DO wish to purchase this mould and one set of handles for it.
Please advise how I may so do?
George R. Kahn
(my street)
(my city, state, and zip code)
Cast bullet handle: georgerkahn
Thank you!
geo
I was able to pay just fine, but all my previous account history (wish list and direct purchases) are missing.
2 mistakes people are doing......
1. Please check that you agree with terms and conditions (open your eyes - not just clicking)
2. If you are putting in zip code use only main zip (12345 format and not this one 12345-12345) - this is dhl problem
I bought four 4-cav HBWC moulds during the 2014 buy: The .44, .41, .38 and the one that's missing from the OP diagrams, the .32. Miha went out of his way and made a .310 version for me. It throws about 100 grains at .311, cleans up very nicely in a .310 sizer, and they work great at the .32S&WL level in my .30 Blackhawks. The throats in my .32-20 1905/4 are about .311 so I'll be sizing some for it and its sister Browning 53 as well. Then I bought a Miculek M25-8 and a Mountain Gun and a couple Blackhawks in .45 LC, so when the .45 HBWC became available again, I grabbed one. The boolits from it will be loaded in .45 Colt and .45 Auto Rim.
These HBWCs are excellent in all calibers I've tried. They are easily as good as the discontinued hard swaged Meister .38s and the Magnus version, and come in calibers where it's hard to find HBWCs. There's a reason the .38 HBWC is ubiquitous in .38 match ammo. Now you can have that edge in your other calibers as well. In my comparisons, the hollow base generally outperform their solid base counterparts. They also make excellent cup-point manstoppers when loaded reversed, because they are the same diameter for their entire length and the flat, full caliber nose makes a fine plain flat base with a scant bevel. For those wondering about the Allen wrenches, the legs for the HB pins have an Allen cavity in the rear or E-clip end, as do the handle screws and the sprue plate screw and its setscrew. Also, I just received my first aluminum M-P mould, and it has Allen setscrews for the sprue pivot and sprue stop bolts, and the contact spot for the sprue cam lever is an Allen bolt.
This is your chance to get one of these and treat your revolvers to the best boolits around. If you're on the fence about buying this mould, jump off on the 'buy' side.
CLOSED
Because this is a repeat mold, Miha has graciously decided to proceed with machining these molds.
So, this group buy is now moved to the closed area. If you were on the fence about this one, please get in now. While Miha will likely make a few extras, you shouldn't just hope to get one that way.
My mould was delivered today :) :) :) -- just as gorgeous as other MP moulds! Thanks to Duke (!!!) for honchoing this, as well as MP for producing/shipment. I'm happy!
geo
I usually get notice from DHL when shipment is n it's way. Maybe I need to check email
Yay, I got my DHL notice. Mold will be here tomorrow.
Thanks, Miha. It's beautiful thing. My set is complete again (38 cal, 44 cal, and 45 cal)
I wonder if we all need a 500 mag sized hbwc?