RCBS Lube sizer and issues
I bought this about 4 months ago. It done a great job with Carnuba Blue and sizing 45 colt bullets. I am noticing with Bac lube that I am really having to bear down on the handle and usually a full turn and 1/2 to get lube into the bullet cast from the NOE mold. It wasn't as hard with the Carnuba Blue as it is now. Tried the Lyman heater under it and may help a small amount but not much. I am having to stand up and get some really forceful leverage on the 45-70 bullets. The rings and threads are all ok and I keep the rings lubed. Don't have it in front of me but I am sizing this down about 3 thousandths from cast size.
Got an older Lyman 450 and the ratchet stripped out trying to get lube in the grooves with it. Room is at 74 degrees at all times. Any advise or is it just take this much force. Sizing die is a Lyman.