CLOSED - 462 Hammer GC 330gr Mihec Cramer HP - (RERUN)

Printable View

Show 40 post(s) from this thread on one page

05-23-2018, 10:02 PM
Lakehouse2012

Quote:

Originally Posted by bluejay75

Please remove me from this buy. Thanks.

No Problem Bluejay, I've removed you.
06-06-2018, 02:22 AM
schemelschelm

@Lakehouse Please remove me from this buy.
06-06-2018, 10:45 PM
Lakehouse2012

Ok, you are off this one. Sorry to see you go.

Quote:

Originally Posted by schemelschelm

@Lakehouse Please remove me from this buy.
06-11-2018, 11:05 PM
Lakehouse2012

Who is ready for this really well proven design?.... 458 SOCOM, 45-70, 450 Marlin, just to name a few. This Hammer mold has proven itself with many hunters and sportsmen alike!
06-12-2018, 01:44 AM
Beagle333

It's an awesome boolit. Jump on in!! :D

http://i613.photobucket.com/albums/t...ps60a3fa0d.jpg
http://i613.photobucket.com/albums/t...psa507fd13.jpg

Bluejay75, they are a .460 now. I can't quite remember what size they dropped. I cast too many sizes and have such a bad memory.:wink:
06-12-2018, 09:00 AM
Wasalmonslayer

Let me tell you I can mirror what these guys are saying.
It shoots straight and kills animals like Zeus hit em with a hammer!!
06-12-2018, 09:11 AM
bluejay75

Quote:

Originally Posted by Beagle333

It's an awesome boolit. Jump on in!! :D

http://i613.photobucket.com/albums/t...ps60a3fa0d.jpg
http://i613.photobucket.com/albums/t...psa507fd13.jpg

Now that is some casting skill!!! Gorgeous boolits. Is that a .462 sized down?
06-12-2018, 11:17 AM
FLYCUTTER

(flycutter) rUNDERSCOREkarkATattDOTnet
one brass 4 cavity GC. .460 dia.,with all pins
06-12-2018, 07:29 PM
Lakehouse2012

Thanks Sir, I've added you to slot #3, please confirm I've got it listed correctly.

Quote:

Originally Posted by FLYCUTTER

(flycutter) rUNDERSCOREkarkATattDOTnet
one brass 4 cavity GC. .460 dia.,with all pins

Sent from my SM-G950U using Tapatalk
06-13-2018, 12:41 AM
FLYCUTTER

Yes sir lakehouse, you do have it correct and I thank you.
06-18-2018, 10:39 AM
thraxx

I'm starting to think I might need this in the .460 size.

I plan on feeding it to my .454/.45LC and a .458 SOCOM. also WAsalmonslayer mentioned that his .460 drops at .462. I'm hoping the more experienced casters will give me some guidance.

I plan on casting with range scrap.
06-18-2018, 10:41 PM
Lakehouse2012

Hi Thraxx,

I contacted Bob Kell, who is the designer of this mold. From his response below, I think the .462 mold will work very well for all your needs. Might require a bit more force on sizing, but this is truly a multi-capable boolit:

Some history for you.... this was a want from a guy in the NorthWest, he had a mold which shot very well, but was on it's last legs... he wanted a duplicate for his 45-70 AND wanted it to be capable of being used in a 45 Colt at 0.452", so he sent me some of his last bullets out of the mold before it died. Well, I worked it out so it did both, the only mold to date with a possible 0.010" sizing spread. Start changing the nose size and the compatibility and fit drops. Leave it as is and note the original purpose of 45-70 and 45 Colt loadings............... Bob

Quote:

Originally Posted by thraxx

I'm starting to think I might need this in the .460 size.

I plan on feeding it to my .454/.45LC and a .458 SOCOM. also WAsalmonslayer mentioned that his .460 drops at .462. I'm hoping the more experienced casters will give me some guidance.

I plan on casting with range scrap.
06-18-2018, 11:36 PM
AnthonyB

4 cavity GCHP all pins for anthony (no spaces) b45@verizon.net . I would also take a two cavity solid PB IF we get to that point in the order process.
Tony
06-18-2018, 11:54 PM
thraxx

Quote:

Originally Posted by Lakehouse2012

Hi Thraxx,

I contacted Bob Kell, who is the designer of this mold. From his response below, I think the .462 mold will work very well for all your needs. Might require a bit more force on sizing, but this is truly a multi-capable boolit:

Some history for you.... this was a want from a guy in the NorthWest, he had a mold which shot very well, but was on it's last legs... he wanted a duplicate for his 45-70 AND wanted it to be capable of being used in a 45 Colt at 0.452", so he sent me some of his last bullets out of the mold before it died. Well, I worked it out so it did both, the only mold to date with a possible 0.010" sizing spread. Start changing the nose size and the compatibility and fit drops. Leave it as is and note the original purpose of 45-70 and 45 Colt loadings............... Bob

Thanks Lakehouse!

with above info, I think i'll leave things where they're at, then. :)
06-19-2018, 12:03 AM
Papa Bang

(Papa Bang) (bnr5861 at gmail dot com) (Brass, 4 cavity HP, GC) (59823)
06-19-2018, 12:21 PM
Lakehouse2012

Quote:

Originally Posted by Papa Bang

(Papa Bang) (bnr5861 at gmail dot com) (Brass, 4 cavity HP, GC) (59823)

Thanks Bang, I've added you to the list.

Sent from my SM-G950U using Tapatalk
06-19-2018, 12:27 PM
Lakehouse2012

Quote:

Originally Posted by AnthonyB

4 cavity GCHP all pins for anthony (no spaces) b45@verizon.net . I would also take a two cavity solid PB IF we get to that point in the order process.
Tony

Thanks AnthonyB, I've listed both in my post and will contact Miha to confirm, but I dont see any problem with the 2 cav solid.

Sent from my SM-G950U using Tapatalk
06-20-2018, 12:29 PM
Papa Bang

Quote:

Originally Posted by Lakehouse2012

Thanks Bang, I've added you to the list.

Sent from my SM-G950U using Tapatalk

Thank you. Do I need to request all pins or is it assumed they'll be included?
06-20-2018, 12:53 PM
Lakehouse2012

You'll get all the pins that are available. No need to mention, even though everyone does... [emoji16]

Quote:

Originally Posted by Papa Bang

Thank you. Do I need to request all pins or is it assumed they'll be included?

Sent from my SM-G950U using Tapatalk
06-20-2018, 01:44 PM
jmort

Six cavity aluimum gas check
middle earth sales and service at g mail dot com

Show 40 post(s) from this thread on one page