Did I miss the price some where?
Scott
Printable View
Did I miss the price some where?
Scott
Greetings, John it was good hearing from you after a long time, please keep in mind some wads are no longer available and stick with the name brand wads, Forget the claybuster wads as they too are crap ! !
Here is the chart with different RB and slug in wad:
https://i.imgur.com/CtlOdHK.jpg
Try to order it with at least two or three hollow base pins so you can alter the weight too with your own 2 cents by putting it in a drill press.
https://i.imgur.com/FbCcfyy.jpg
https://i.imgur.com/1dsUfAF.jpg
Best regards,
Ajay K. Madan
Super Blazing Sabots
You are going to sign up for this aren't you Ajay? I don't see your name on the list! Everyone needs one of these whether they shoot slugs or not. Its a Mihec brass mould... sometimes referred to as man jewelry (except you don't wear them of course).
C'mon... splurge! Surely you still have at least one 12 ga. to feed.
Longbow
twgrubb3 at gmail dot com. 2 cavity .680” all pins plus handles 41143
Getting close gents...
I'm in,
ktlachac at aol dot com (1)–2 Cavity mold-.678 Diameter-All Pins- + handles 54220
Crash87
I'd like to get in on this......all pins ,2 cavity .680............... stripercrazy@yahoo dot com 02916
I'd like to get in on this......all pins ,2 cavity .680 c kulyk at telus dot net T 2 K 1 E 6
Updated. Going to ask Mihec if we are going to run at 15 or wait for 20. By any measure we have enough to order the cherry.
I hope this isn't common knowledge, but can Mihec make these molds Master Caster compatible?
a one off custom mould?
Can I get in on this in Australia, or is it too late. Just discovered this thread.
Keith
As strange as this sounds, I'd like to change my mold to a .678" diameter please.
One mold if not to late. shasselback at hamptoncountysc dot org. all pins, two cavity .680 29944