does anyone know where I can find the thin 7/8x14 locking nuts for the old C&H die sets?
Thanks, Steve
Printable View
does anyone know where I can find the thin 7/8x14 locking nuts for the old C&H die sets?
Thanks, Steve
call CH4d directlyOr go on Ebay
Ask for Denny
thanks for the leads. I should have been a little more specific. I need about thirty nuts. I previously checked with 4d and they no longer use the two nut locking system, others are out of stock or sell by the 1000. I lucked into a large group of old C&H Dies that were all missing the locking nuts. I could use the RCBS or Lyman or Lee locking rings but I wanted to keep the dies as original as possible. I doubt I'll use these but they do make a nice display Thanks, Steve
Are you going to use the dies; go to home depot, doesn't have to be thin.
If you are just going to dosplay, keep looking.
All my "old" is still productively working