Thanks for all the suggestions.
I will try to get to it and take some picture.
Printable View
Thanks for all the suggestions.
I will try to get to it and take some picture.
I lathe turned a couple ends from brass as it was all I had at the time. Worked fine.
3/4" copper round $4.28 per inch plus shipping. I would check Home Depot for grounding rod first before spending $$ on this. You'll probably need minimum 3" to make a couple ends.
https://www.speedymetals.com/pc-2944...10-copper.aspx
For the power cord I bought a 30 foot RV 50 amp cord. It runs on a separate 50 amp 220vac outlet.
https://images34.fotki.com/v1200/pho...F2542np-vi.jpg
https://images49.fotki.com/v1674/pho...CF3318x-vi.jpg
https://images46.fotki.com/v1224/pho...SCF2358-vi.jpg
Had some time, inbetween the rain, to open it up.
Looks very clean inside.
Plug is just a tapered pin.
I took one out to take with me to the welding shop.
Wish me luck.
Attachment 325481Attachment 325482Attachment 325483Attachment 325484