Printable View
Curious to what the majority think would be the better design for PCing: The groove design, not somuch to overall scheme or style.
Tumble lube design Attachment 262838Attachment 262840 vs normal lube grooves.Attachment 262837Attachment 262839
I'm not too sure I'd like the plane shank bullet for PCing, seems the drag would increase. Thoughts?
You have the right idea.
More surface/contact area will have more friction/drag.
Which ever one has more contact area might need 10-12 more little specks of powder to reach the same speed.
For me, I'd find the one most accurate for my application, and be happy with it.
I'm not made of money any more. I just retired.:-)Quote:
Originally Posted by Winger Ed.
I am considering a purchase for a 38-55 mold and/or a 45-70 mold for PCing. I don't want to buy both styles just to find out.
Dig around other sights and archives, and see what everyone else is having good luck with.Quote:
Originally Posted by hpdrifter
I did that looking for the perfect DEWC mold for a S&W Model 52.
The perfect Lyman one the serious shooters won money with was discontinued years ago.
But; I found a almost never used one, with handles on ebay for $60.
If it was still in production, a new one would have been $100. & something---
with the new handles I don't like as much as the old style.
For the .45-70-- The standard 405 is good, but punishing to shoot above trap door speeds.
If I was wanting a new one myself, I'd be looking at the 300 & something grain molds
instead of 400-ish.
You're only 20-odd miles from here. We're just off the road going to 7 Points.
I'll give ya a bunch of 405s if you want to try them out.
If you look close at those 45-70 boolits up yonder, you'd see I'm lookin at ~300 grainers.
I've got Lee's 405 HB. It's in poor shape though and was looking to get an Accurate mold of multiple cavity design. The examples above are from his line-up.
I just wanted to know if someone thought the tumble lube design was better for powder coating than standard lube groove. That's all.