1 Attachment(s)
MP MOLDS Larsen C432-300 RF for 44 Magnum and 444 Marlin
Fellow Boolit Casters,
Mr. Glenn Larsen has come out of design retirement to offer the Larsen C432-300 RF. It is spec'ed out for around 300 grains maybe a little over. Pin options is where this will be a must have. Will come with Large, Shallow Penta (Same depth as the small pin in the Hammer series) and Deep Penta (Same Depth as the Large pin in the Hammer Series) and flat. Both Penta pins will be rounded to prevent breakage if expansion reaches the base of the HP. The large and deep Penta should get the weight down around 285-290 giving good weight for caliber but lots of bearing surface.
Attachment 235250
This is a new boolit design (scaled up from the C358-180 applying all of the same priciples that made the original boolit very accurate). This will be suitable for any 44 Special/Magnum (or longer versions) along with the 444 Marlin firearms. It will cast at about 0.432" or 0.434" (your choice) dependent on your alloy. The weight is as shown on the drawing dependent on your alloy of choice. Meplat to crimp will fit long Ruger Cylinders but has as much full diameter beyond the crimp groove as the HG 503.
WE NEED 12 TO COMMIT BEFORE IT MOVES TO ACTIVE AND A FULL 25 HP SIGN UPS BEFORE IT CLOSES!!!
Options and details . .
1. Mold will be available in 2 Cavity brass HP, 4 Cavity Brass HP, 4 Cavity Brass Solid or 6 Cavity Aluminum Solid only.
2. Available in .432 and .434 diameters (WW).
3. Comes with Large Pin, Shallow Penta, Deep Penta and Flat
4. Available in Gas Check or Plain base
5. Available in the Wonderful 6 Cavity Aluminum also.
Disguised Email- HP or Solid- Diameter-# of Cavities-PB or GC- Zip Code if you want to be able to track your package
Example:
j_bownes at yahoo dot com -SOLID .432- 6 Cavity PB-Aluminum- 12121
or
j_bownes at yahoo dot com – HP -.434- 4 Cavity GC-All Pins- 12121
Cost is as follows:
Solid Molds -
- 4 Cavity solid Brass 95 Euro's (80,75 with discount)
- 6 Cavity solid Aluminum 95 Euro's (80,75 with discount)
Hp Molds -
- 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)
These prices will be converted to us dollars when you get the paypal invoice.
GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME
Add a set of Handles for 20 additional Euros. A savings of 3 off standard pricing.
Please include your (disguised) email address with your request.
Miha will send out invoices about the time the buy gets closed. Payment's through PayPal (he's in Slovenia). Shipping's direct.
Sign Up List:
Solid:
1)j underscore bownes at yahoo dot com- SOLID – 0.434 – 6 cavity PB - Aluminum
2)greg ((att)) watch mans tower ((dott)) com -SOLID- .432- 6 Cavity PB- NO LUBE GROOVES- HI TEK -Aluminum- 65552
3)
4)
5)
6)
7)
8)
9)
10)
Hollow Point:
1)j underscore bownes at yahoo dot com – 0.434 – 4 cavity HP PB-(ALL Pins)(Honcho)
2)idahobronco at aol Dot com– 0.434 – 4 cavity HP PB-(ALL Pins)(Honcho)
3)Tja6435 gmail– 0.434 – 4 cavity HP PB-(ALL Pins)
4)greg ((att)) watch mans tower ((dott)) com - HP -.432 - 4 Cavity PB- NO LUBE GROOVES- HI TEK - All Pins- 65552
5)no34570 at gmail dot com-– 0.434 – 2 cavity HP GC-(ALL Pins)
6) ronbethwyatt at gmail dot com -.434 -2 cavity HP PB all pins-72007
7)namovlov at bigpond dot com– 0.432 – 4 cavity HP GC-(ALL Pins)
8)shutupandjump at yahoo dot com- 4-cav HP GC .434 mold, all pins
9)krflff2 at dejazzd dot com-0.432 – 2 cavity HP GC-(ALL Pins) 17578
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
22)
23)
24)
25)
*****Cutting Molds
26)
27)
28)
