Printable View
Is there interest for such mold out there??
I have cherries and blocks ready.
I did it for a customer from Sweden for PPC competition.
We can do 6cav brass or 8 cav aluminum........
.359 as cast weight 140 grains with WW alloy and aprox 135 with lyman #2 alloy.
It cycles nice in my 9mm Tanfoglio limited custom
https://scontent.flju1-1.fna.fbcdn.n...9f&oe=593CED8F
https://scontent.flju1-1.fna.fbcdn.n...bf&oe=5904FFB5
I think I would like a 8 cav aluminum........
I would be interested in an eight cavity.
Would you consider doing 4 cav aluminium?
I can cut you 6 cav Lee style for same price. or brassQuote:
Originally Posted by GWM
Plying around with this one as we speak.
https://scontent.flju1-1.fna.fbcdn.n...f4&oe=593A5E53
Interesting
Reports on how it shoots? Anyone try loading 38 Special?
Works fine in my F92 and G17, nice clean holes, accuracy on pair with my 9mm SWC, 10m distance, I am not an expert and this was just https://uploads.tapatalk-cdn.com/201...51c1e84310.jpgfunction test so far, but it works fine. Plinking and competition type of bullet, not finicky to loadhttps://uploads.tapatalk-cdn.com/201...7f27840ab7.jpg
Around here in MI the 9mm factory stuff sell pretty cheap. Not worth chasing the empties.
Casted today with that mold...once I figured out proper lead flow on my electric furnace, around 10th pour, it just started to drop perfect bullets, perfect basesAttachment 188521
Three to five taps and they were all out.
https://uploads.tapatalk-cdn.com/201...b16ae4cb65.jpg
Mold is a bit lighter, compared to my 6cav SWC, also MiHec, copy of H&G#278, so it's easier on wrists
https://uploads.tapatalk-cdn.com/201...b1be64573e.jpg
Yes preheating it is almost a must....got a nice pile that I powder-coated....https://uploads.tapatalk-cdn.com/201...c186d9b3a2.jpg
So casting with it - usual custom brass experience, prewarmed on a hot plate, and I casted with 370 degrees Celsius.
I don't really need one but I kind of want one
Same as Loudy13, don't need it but would like the brass one.
I'd like to have an 8-cavity al mold. It would make a pile of bullets in a hurry.
This would be a fun bullet to use on "Battleship" splatter targets.
Got an ex-special forces friend that I like to compete with. I'm almost as good as him, but not quite.
I would like to try an 8 cavity aluminum mold. How much $ or €?
Good evening,
I would like a 8 cavity aluminum.
Thank you.
Any chance on a gas check option?
How does the boolit perform at ppc for the swede?
I can send few free samples-inside EU only.
Have few as cast and a lot powder coated, sized to 358".
ATTACH]191498[/ATTACH]