.40 165 RNFP MP vs Accurate vs????

Hey Guys.

Im looking for a new mold for my .40. I'm currently using the lee 175 TC 6 banger. i powder coat these, and have had great feeding and fair accuracy. I'm casting for volume, as I'm an IPSC competitor, shooting 1000 rounds a month of .40.
What I'm looking for is a mold ~ 165 grains, round nose flat point or maybe another TC with no lube gove for powder coating. minimum 4 hole mold, with feeding reliability as a primary consideration. ( feeding a CZ TSO)

So far, I've narrowed it down to two I'm thinking of:
MP molds ; 402-160 HP PB mold
https://www.mp-molds.com/e-shop/mold...p-pb-nlg-4-cav

or

Accurate molds ; 40-165Y mold
http://www.accuratemolds.com/bullet_...=40-165Y-D.png

At the moment I'm leaning towards the accurate, simply as the MP mold has been out of stock for months and I never got an email back about it.
Any input would be much appreciated on pros/cons of each or alternate suggestions.

Kia Ora from New Zealand

There is a group but in discussion for a 40 caliber 165 grain boolit. Here is the link

https://r.tapatalk.com/shareLink?url...8&share_type=t



Sent from my SAMSUNG-SM-G891A using Tapatalk

If you need a hollow point go with Mihec
Otherwise go with Accurate

There is a MP 402-160 HP mold for sale. See link below.

http://castboolits.gunloads.com/show...an-rcbs-mp-noe

I have several molds from Tom @ accurate molds that have no lube grooves and all cast great. The last mold I got from Tom took 4 days to receive it and it is a work of art, the mold is a 240gr 10mm and with my lead bullets are running 239gr + - very consistent.
Attachment 223478

You should get on the group order for the 165....just need a few more and I can get my mold lol (6 hole no lube groove)