Show us your Smelting Setup. Vote for the best submission who will get a Cast Boolit Bumber Sticker.
Good Luck!
Printable View
Show us your Smelting Setup. Vote for the best submission who will get a Cast Boolit Bumber Sticker.
Good Luck!
Nice setup...I like your ingot mold setup!
My operation is pretty small. I have a couple of the LEE lead melting pots and a Lyman ingot mold. But I like what you others have setup and are doing though.
Attachment 283216
Attachment 283217
The pot can hold 400lbs of pure lead I lke yuo keep the batches smaller tho.The ingot molds I made myself from heavy 2inch angle.The i gots are pretty close to 4lbs. The burner is a double jet from Bayou Classic.
Attachment 283243Attachment 283244Attachment 283245
Wow them some serious pots there I’ve never had a pot but 1/2 full, leaves Room for fluxing.
wow GRMPS.. will you adopt me?
So.... Where ya'll finding the completely clean, apparently brand new GIANT cowws???? I want in on that....
https://i.postimg.cc/rmsPP3P8/20150129_161107.jpg
https://i.postimg.cc/cHCRWSWb/20150129_150103.jpg
https://i.postimg.cc/2SySZfQq/20190324_111403.jpg
https://i.postimg.cc/j52bGNQP/new-im...0-2017-001.jpg
https://i.postimg.cc/k5ntQ22C/Screen...9-06-53-35.png
https://i.postimg.cc/9Q9B8wXq/20190325_043025.jpg
The small squares are 5 pounders, the bricks are the 10 pound ingots. I needed a bigger mold so I could empty the pot faster, and the 10 pound ingots still fit in the 40 pound pot on the Master Caster. I'm now making a pot out of a propane tank. And let me tell you the price of steel angle iron has increased astronomically. But, this setup has given me about 4,000 pounds of alloy, so no complaints.
MOA I to have melted about 4,000lbs of lead but not all with the setup I have now.You have allready done what i am going to do if I ever get alot more lead to clean up.That is get the ingots off the ground.In the 10 oe so years i been collecting lead i am not getting any younger and every little this helps. Yes steel prices ar hi right now I am a tool and die maker in a stamping plant.the steel has gone way up and alot of things they use are getting harder to get.
I'm just finishing up the last of the rough lead into ingots. The new pot will be mostly used for mixing specific alloys for specific cartridge requirements. I've still got lots of testing to do on alloy mixing.Quote:
Originally Posted by Mitch
Where do you get your wheel weights? They look brand new!Quote:
Originally Posted by Conditor22
I had converted a Weber grill that neighbors down the street had put out for collection. Walked that suckered almost a 1/4 to my place. Works for me and when I had neighbors the lid really hid what I was doing and cut way down on the smoke.
Attachment 283457
Attachment 283458
Attachment 283459
Attachment 283460
Attachment 283461
Put a turkey fryer in it and cit the bottom of the charcoal pan to fit the cut off propane tank. Can handle 150lbs with no problems. Used a welding blanket as a wind screen.
Ron
Attachment 284966
Attachment 284967
I made this burner to smelt range scrap with used motor oil.
That's a nice burner an stand setup Backcut.
I only have a propane tank and burner......boy do I feel under equipped.....all my WW sources seem to be all Zinc now :groner: I have about 100# of pure lead sheet( x-ray room re-model) and 100# of COWW.