1 Attachment(s)
MP Molds 450BM- C- 275 grain (Cast) for 450 Bushmaster/ 45 Colt/ 454 Casull
Fellow Boolit Casters,
******* This is the discussion thread that will later become the group buy. Any comments welcome. Design WILL change as feedback is gathered and collated and the dimensions of the pins worked out. At the end...this WILL be a boolit that performs! Your input is necessary/ encouraged and will be considered*********
Attachment 237622
This will be one of the last Group Buys for FY19. It has been a pleasure serving you but I need some time to cast myself. But I am going out with a bang. The 450 Bushmaster crowd NEEDS a mold to maximize the powerhouse cartridge whether in an AR or a Bolt Gun.
Mr. Glenn Larsen has come out of design retirement AGAIN to offer the Design the MP Molds 450BM- C- 285 (Cast) . It is spec'ed out for around 285 grains maybe a little over as a solid and 270 with the largest HP. Should really optimize the performance of the standard twist rate and potential of the cartridge. Pin options is where this will be a must have. Will come with Large Wide Penta, Large and Narrow Penta and flat. Both Penta pins will be rounded to prevent breakage if expansion reaches the base of the HP.
WE NEED 12 TO COMMIT BEFORE IT MOVES TO ACTIVE AND A FULL 25 HP SIGN UPS BEFORE IT CLOSES!!!
Options and details . .
1. Mold will be available in 2 Cavity brass HP, 4 Cavity Brass HP, 4 Cavity Brass Solid or 6 Cavity Aluminum Solid only.
2. Available in .452 and .454 diameters (WW).
3. Comes with Large Pin, Wide Penta, Narrow Penta and Flat
4. Available in Gas Check or Plain base
5. Available in the Wonderful 6 Cavity Aluminum also.
Disguised Email- HP or Solid- Diameter-# of Cavities-PB or GC- Zip Code if you want to be able to track your package
Example:
j_bownes at yahoo dot com -SOLID .452- 6 Cavity PB-Aluminum- 12121
or
j_bownes at yahoo dot com – HP -.454- 4 Cavity GC-All Pins- 12121
Cost is as follows:
Solid Molds -
- 4 Cavity solid Brass 95 Euro's (80,75 with discount)
- 6 Cavity solid Aluminum 95 Euro's (80,75 with discount)
Hp Molds -
- 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)
These prices will be converted to us dollars when you get the paypal invoice.
GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME
Add a set of Handles for 20 additional Euros. A savings of 3 off standard pricing.
Please include your (disguised) email address with your request.
Miha will send out invoices about the time the buy gets closed. Payment's through PayPal (he's in Slovenia). Shipping's direct.
Sign Up List:
Solid:
1)j_bownes at yahoo dot com -SOLID .454- 6 Cavity PB-Aluminum- 27540
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
Hollow Point:
1)j_bownes at yahoo dot com – HP -.454- 4 Cavity PB-All Pins (HONCHO)- 27540
2)glockinstein40 At yahoo dot com – HP -.452- 2 Cavity GC-All Pins- NO LUBE GROOVES- 49286
3)brianeccas at gmail dot com – HP - .454 - 2 Cavity - Brass - GC - Lube Groove - All Pins
4)Coryrams at hotmail dot com– HP - .452 - 2 Cavity - Brass - GC - Lube Groove - All Pins
5)Trap4uohio at sbcglobal dot ne – HP - .452 - 2 Cavity - Brass - GC - Lube Groove - All Pins
6)bluewrench75 at gmail dot com-HP -.454- 4 Cavity GC-Lube Groove- All Pins- 26034
7)idahobronco at aol Dot com-HP -.454- 4 Cavity GC-Lube Groove- All Pins- (Honcho)(Designer)
8)Jay72145 at gmail dot com- HP- 452-2 cavity GC all pins 72136
9)rocpyro at gmail-HP -.454- 4 Cavity GC-Lube Groove- All Pins + Handles
10)dark11d at yahoo dot com --HP -.454- 4 Cavity GC-All Pins+ HANDLES 49302
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
