-
ive been thinking
ive been thinking of making a 270 cal rifle for small deer , goats , pigs here in Aussieland , using 250 savage case with 130\140 gr bullet , i saw a used 788 rem in the gun shop in Bathurst yesterday in 22-250 ,i didnt check the rifle or the price they want but i know where one is , what are peoples thoughts ?
-
What advantage do you see over a .260 Remington or 7mm/08?
-
a shorter bolt throw in a short/ medium action , less space to fill for when using cast as this will a cast rifle , Roo
-
Castaroo -
G'Day on ya !
You might be able to neck-up .22-250 brass to final .270" cal desired, going in reasonable neck expansion increments.
For this process, you might be able to initially expand using a LEE .250 Savage FL die; for a first step up to .25" caliber.
A LEE 6.5mm Grendel die could be used for the second expansion, out to .264".
A LEE 6.8 SPC expander would next be installed in the 'Grendel die, for the final expansion out to .270" cal.
Both of these dies feature the same expander " clamp ", so all that would get swapped-over is the expanders.
I mention LEE dies because ( IMHO ) they are handy for " wildcatting ", cost is reasonable; and LEE has has made replacement die parts readily available.
With regards,
357Mag
-
I think I would try a load of fast burning powder topped with corn meal in the 22/250 cases to
blow them out to .277. Should work and not as much trouble as expanding.
-
At the risk of seeming crazy (too late) just shoot 22-250 or .250 Savage ammo in it to form the brass. Wear glasses.
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
i have already have fired formed 250 sav cases with most of being neck sized and have got 270 neck dies so can i just neck sized these as they are ? i have to get the rifle builded first but . roo
-
1 Attachment(s)
Attachment 218164
Do a google on this one, sounds exactly like what your looking for.
-
is the same 250 case ?i think your've the case i need , thank you for your replys ,roo
-
1 Attachment(s)
It's based on the 25 savage case just like the 300 savage and the 22-250. Looking at the min chamber dimensions you might have to set the barrel back a thread to clean up the 22-250 chamber to the 270 Titus after the reborn. The 22-250 chamber is a little longer to the shoulder than the 270 print I have. That said it's a wildcat so if you fire form brass that issue disappears and your neck gets a little shorter.
Attachment 218218
-
thank you for this , going to talk with my gunsmith tomorrow and will take this with me ,roo