NOE 311, 314, 316 155Gr. FN

NOE 311, 314, 316 155Gr. FN
Here is the link to the discussion thread:
http://castboolits.gunloads.com/showthread.php?t=105570
http://i69.photobucket.com/albums/i8...311155grFN.jpg
We will offer this bullet in .311", .314", .316" diameters.
One size per block. (No mixing diameter)

This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 5.
We will offer PB and GC on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin with pin holder would be $35.00 Extra

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3.5% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289


Thank you for your interest in this buy.
Swede Nelson

List of orders
*1 rockrat 5 cavity GC .311
2 blaser.306 5 cavity GC .311 drill for probe
*3 Wayne S 5 cavity GC .311
*4 Artful 5 cavity 3GC 2PB .314
*5 miestro_jerry 4 cavity GC .314
6 Dutch4122 5 cavity GC .316
7 Dutch4122 5 cavity GC .314
8 Dutch4122 2 cavity PB .311
*9 Alchemist 3 cavity GC .311
10 linotype 2 cavity GC .316
*11 chboats 2 cavity GC .311
*12 chboats 2 cavity GC .316
13 Idaho Sharpshooter 5 cavity GC .314
14 20nickels 5 cavity GC .314
*15 gmsharps 3 cavity GC .314 drill for probe
*16 no34570 3 cavity GC .316 drill for probe
*17 ihmsakiwi 5 cavity GC .311 drill for probe
*18 99unique 4 cavity GC .316
19 ak_milsurp 2 cavity GC .314
20 ak_milsurp 2 cavity GC .316
21 micky_blue 4 cavity GC .314
*22 Dschuttig 4 cavity GC .316
*23 Springfield 4 cavity GC .311
*24 Paulinski 3 cavity GC .311
*25 dromia 4 cavity GC .311 drill for probe
*26 dromia 4 cavity GC .316 drill for probe
27 rays308 5 cavity GC .311
*28 sleeper1428 4 cavity GC .314
*29 A pause for the COZ 4 cavity 2GC 2PB .314
*30 x101airborne 3 cavity GC w/HP .312 drill for probe
*31 x101airborne 3 cavity GC w/HP .316 drill for probe
*32 Nora 2 cavity GC .316
*33 excess650 4 cavity GC .311
*34 bodydoc447 5 cavity GC .311
*35 bodydoc447 4 cavity GC .314
36 greysage 5 cavity PB .311
37 ckcadavona 5 cavity 4GC 1PB .314 drill for probe
38 longshot 5 cavity GC .311
*39 Coconino 4 cavity GC .311
*40 Hamish 5 cavity 2GC 3PB .316
41 Sagebrush7 4 cavity GC w/HP.311
*42 highHook 4 cavity GC .316
*43 highHook 5 cavity GC .311
44 Dangerdude 5 cavity GC .314
*45 Mr Peabody 2 cavity 2GC .316
*46 15bobcat 2 cavity 1GC 1PB .314
*47 Northerner 5 cavity GC w/HP .314
*48 Northerner 5 cavity GC w/HP .314
*49 Woodshot 4 cavity 2GC 2PB .316 drill for probe
*50 crabo 5 cavity 5GC .311
*51 crabo 5 cavity 5PB .311
*52 Johnvid 5 cavity GC .311
*53 rollmyown 2 cavity GC .311
*54 Leonidas 4 cavity GC .311
*55 schoolbus 5 cavity GC .311
*56 SAJTU 3 cavity GC .314 drill for probe
*57 CENTEX BILL 3 cavity GC .311
*58 Mark85304 4 cavity GC .311
59
60
61
62
63
64
65



(*) = Paid


Thanks
Swede Nelson

5 cav .311 gas check please

I'm in ! .311 gas check 5 cavity ! drill for probe please .

I'll take a 3 cavity all GC +HP in .316 diameter please and drill for probe too,thanks

5 cavity, .311 GC

I want a two cavity .314 Gas check

5 cavity .314 please - 3 GC -2 PB

I want a 4 cavity GC mold, in .314, the money has been sent via PayPal.

Thanks,

Jerry

Swede,

I see your mention of an RG4 option. If this is true, pencil me in for one, .303-.314" and call me Mr Happy.

thanks for all the fine work you are doing for us.

Rich

Assuming that the bore riding nose section of the .316" version will be .306" as mentioned in the discussion thread; then you can put me on the list for:

.316" / 5 Cavity / all gas checked.

Thanks for running this design with these options. :drinks:

Idaho Sharpshooter

No RG moulds on this one, Sorry
"Hollow pointing one cavity and furnishing a double
ended pin with pin holder would be $35.00 Extra."

Swede Nelson

Swede,

I'll take a 3 cavity .311 GC.

I know there were more that 8 on my origional post that said they wanted one.

How does everyone else feel about kicking in a few extra dollars to get this as a SGB on the schedule.
I think it's and extra $ 10.00 for only 5 molds, so 8 of us it would be $ 6.25, and by the time this gets to the mill we should our 15 buyers and the $$ should go back to the origional price

Wayne S, it's only been 4 days since new thread was created - give the missing guys a chance to find it - not all of have the same degree of addiction. ;^)

And I see it's already scheduled for July so we have a while to get all on board.
http://castboolits.gunloads.com/showthread.php?t=130122

Quote:

---

Originally Posted by Wayne S

I know there were more that 8 on my origional post that said they wanted one.

How does everyone else feel about kicking in a few extra dollars to get this as a SGB on the schedule.
I think it's and extra $ 10.00 for only 5 molds, so 8 of us it would be $ 6.25, and by the time this gets to the mill we should our 15 buyers and the $$ should go back to the origional price

---

I just found this yesterday and posted to sign up. Swede hasn't updated the list to put me on it yet. More will come I'm sure..

This is already on the schedule for July, would adding the SGB fee get it moved up? If so, I'd be willing. I can't see how it would make a difference to the schedule though...

I will take a double cavity .316"/.306" GC

After a reminding from Artful. put me down for a 2 cavity .311 and a 2 cavity .316, all GC

Carl

Quote:

---

Originally Posted by Alchemist

I just found this yesterday and posted to sign up. Swede hasn't updated the list to put me on it yet. More will come I'm sure..

This is already on the schedule for July, would adding the SGB fee get it moved up? If so, I'd be willing. I can't see how it would make a difference to the schedule though...

---

Since we are already on the schedule for July :groner:, no need for the SGB

5-cavity in .314". I just saw an ad in SGN for a 75 rd drum for an SKS. Looks like somebody made an adapter for the AK drum. I will need this mould to feed that bad dog...

Rich