Originally Posted by
gwpercle
The boolit needs to be deeper into the case ( For my P38 anyways) The top edge of the case mouth should be just below the very top edge of driving the band and above the crimp groove . Right now you are seated below the crimp groove
Move the case mouth/edge up to the next band , effectively seating the boolit deeper into the case . There is plenty of room ...it's a short boolit .
4.7 grains of Unique was the lowest charge that gave reliable functioning and shot to a 6:oclock hold .
I would do a photo if I could but lack skills .
My OAL dimensions may have been off , it's hard for me to read dial caliper lately, blind in one eye , can't see out the other !
seat the boolit deeper OAL be hanged .
4.8 grains Unique should be right on
Gary