What is your favorite roll your own load - powder - grains & bullet?
What is the effective range of your load on pigs & small/medium deer from a 18"/20" barrel?
Printable View
What is your favorite roll your own load - powder - grains & bullet?
What is the effective range of your load on pigs & small/medium deer from a 18"/20" barrel?
I use the SAECO #354, a 180gr FPGC, cast in linotype with a Hornady gas check. I size to .360 and use Blue Angle lube. I also use a CCI 450 primer with a stout charge of surplus WCC820. The charge is specifically worked up in my Marlin 1894C with it's 18.5" microgroove barrel. I would have no problem using it on less than 200lb hogs out to 100yds, deer out about 25 to 50 yards more. I only use iron sights. If I didn't have a good shot I wouldn't push it.
Bill
I load 11.5 grs H110 and RanchDOG 359190 for my 3 Marlin 357s. I have taken 1 deer with this load.
Papalote
Probably not what you are after - but my favorite load is 25gr Swiss 3f black powder under a 158gr BigLube Greasewagon boolit. Great accuracy and punch out to 100 yards, and in my Rossi 92 is an awesome combo.
My fav load is the just about half way between the recommended minimum and maximum of Trailboss behind a 158Gn RNFP and the first packet of primers that come out of the drawer.
Not the most powerful load, but it rings the steel everytime I do my part and you can give the carbeen to anyone to shoot it is so pleasant out of my Rossi 92 (the one in my avitar).
I have never hunted with it, but have used it a bunch.
That is my favourite and thats what you asked for.
My favorite load for the 1894C is 14.5 2400 behind a 358156 with Felix or BAC lube. Works on everything I put the front bead on.
Good morning
Have the Marlin 94C. I prefer the 180 grainers as I never have to think about will this leave an exit hole. If I did not already have a heavy boolit mold I would get the RD. 190 grains would be as good and his designs already have the fat wide nose you want for good thump on target. Plus the RD casts fat enough. Too many 357 molds are undersized for Marlin throats and the Micro rifling needs a tight fitting fat boolit.
I am rather fond of 296 (or 110) in the 357 with a 180 grainer. 1600+ fps is easy to get to. When you figure the old 38-40 was chugging along at 1500 fps with a 180 grainer the 357 with a 180 is a bit better. And most old timer hunters I knew (Michigan) thought the 38-40 was near the best deer round they knew about.
Mike in Peru
I have been playing for a good while trying to find the ideal load that shoots good enough to wack deer and 'yotes out to 100 yards or a bit further. I can't get 158 SWC boolits to shoot well out of my 94c marlin except with 5 grains of Unique with is a bit light for shooting past 50 to 75 yards. I have had a bit of success with the 158 gr RNFP sized to .358 with a .015 thick homemade gas check and 13.5 grains of AA #9. The reason for the gas check is the Lee RNFP boolit has a bevel base, and bevel bases will not shoot at all out of my Marlin. The homemade gas check squares up the base nicely and makes the difference between a 1 inch group at 75 yards or a 6 inch group with out it. I am waiting for the chance to try it out at 100 yards to see what I get. If I can keep it around 2 inches at 100 yards I figure I will be good to hunt out to 150 yards, and that is about the limit of the 357mag.
Best wishes,
Joe
My best luck has been with the 359640 HP as made by Mihec. Loading it over 13 to 14 gr of WC 820 has given me over 1600 fps and very good accuracy.
I have not yet found an other bullet that shot very well for me. I have learned tha my rifle shoots better the faster the velocity is.
I have had excellent results with the Lyman "Keith" 358429 173 gr SWC in two Rossi 92's and 1 Winchester 94. I load either 15 grs of 820 (slow lot) or 15 grs of 296 and get 1600 fps + out of all the guns. Accuracy at 100 yds is 3-4 MOA and while I've never shot any game with it it has a 70+ year record on game animals.
Ditto!Quote:
Originally Posted by stubshaft
But I use the Balisti-Cast #651.
I also like 12 grains of Accurate no. 9
.
A lot of good info so far. Thanks for your input guys!
RCBS 38-162 SWC GC over 15.7 grains of H 110 is the most accurate load I have found for use in my Rossi. The 358-429 was a total flop, unless I crimped over the shoulder and reduced the powder charge, then it still didn't shoot as well as the RCBS boolit. Light boolits didn't work out for me either, I tried some 115 grainers along with some 358-242 122 grainers, but nether grouped well.