that is ....help please!
i have the "cartridges of the world" book and the c-d that comes with it.
and several loading manuals
none give very good pictures.
and i'm having a bit of trouble i.d.-ing a few
i'm sure you serious collectors won't have any problem with these.
by the way....i also have a case that looks like a .44 special with the head stamp of "MSA PIPE PRESS" can't find anything on it.
got about 6 more soon as i can get pix.
thanks again. mike
Isn’t #3 8x57mm JRS?
Sent from my iPhone using Tapatalk
rim diameter on the 8x57R js (rim is .526) both examples i have measure 0.620Quote:
Originally Posted by carp4
I think #2 is .41 Swiss rimfire and #3 looks like 8mm Lebel. Not sure about #1
Agree about the Lebel. That’s what I thought when I saw it.
Lebel makes sense.
I looked up the 8mm Lebel as that is what I thought when I fist saw it also. There are slight differences in the measurements listed on the picture and the cartridge drawing that I found. The case Rim diameter is listed at .634, the sub rim diameter is .543". The rim thickness is listed as .079. The case length is listed as 1.996". The shoulder diameter is listed as .457". The overall cartridge length is listed as 2.967". Cartridge variations could easily be off a little on the picture as well as on the listed dimensions. james
I believe #3 bottom is 8x56R / 8x60R Portugues Kropatschek. The top Case may also be the same or possible Lebel
we have a winner! after much reading i concur! meets all the required measures even found some pictures. thanks!Quote:
Originally Posted by salpal48
i can't believe that this is not in the book!.....CRAP! thats because it was on the C-D!
#1 looks like a 50-60 Peabody.
Sent from my Pixel 3 XL using Tapatalk
Nice call!Quote:
Originally Posted by mozeppa
Yup I agree with #2 being a 41 Swiss.
Looks like #1 is here (check out the picture on the page)
https://www.thehighroad.org/index.ph...arbine.823585/
Attachment 260169
I have a box of vintage 41 Swiss. This round is:
rim: .626"
bullet diameter at mouth: .428"
For the round to feed properly from the magazine, the OAL has to be 2.21", which this is. That's the giveaway.