I'm thinkin this is a great idea if you have access to a outside wall I have no idea why I didn't think of this guess the oldtimers is kickin in
Printable View
I'm thinkin this is a great idea if you have access to a outside wall I have no idea why I didn't think of this guess the oldtimers is kickin in
Loading a few more .223 Remingtons for testing .
Jack
Working up loads for my .22-250.
Ed
Nice RAK2018:cbpour:
Nothing! I have been trying to get 7 so called Assault rifle ready to register in California. California sucks. I've lived here for 70 years and never would have imagined it could get this bad. Anyway I've stored up maybe 50,000 assorted rounds and have enough bullets, lead, powder and primers for about the same amount again. But I will no doubt have to move back to America to use any of it.
Cleaned some brass and reseated another 100 9mm rounds.
I surprised myself. The last trip to the indoor range after I finished shooting I cleaned the floor in my area and a few adjacent empty stalls for brass. When I got home to inspect my haul it was all 9mm brass... First time I ever did that....
Cast and PC’d 160 of MP359-130. Made a new PID for my cheapo toaster with Smoke’s red.
Shake N’ Bake while it’s raining outside with the garage door open. Fantastic coverage if you ask me.
https://uploads.tapatalk-cdn.com/201...85df459dac.jpg
https://uploads.tapatalk-cdn.com/201...ef15f3a3a2.jpg
Can anyone verify that a convention oven really makes a difference over non convection?
I started with a cheapo toaster oven and was limited to the number of bullets I could bake without having some get darker before all of them pass the smash test. With a convection oven I could bake 8 pounds of bollits evenly at one time due to the fan circulating the hot air.
Those look good for a toaster oven. I would smash test the ones on the ends and center to make sure all are cured enough for shooting.
i know.. those look great..
didn't know that.. thanks for sharing.
well i had the day off from work so decided to cast up a few boolits for my 44 magnum Attachment 215304
Very nice!
Primed 25 .577 Snider and 25 .577-450 Martini Henry cases today. Large pistol primer. Going to start loading them tonight and tomorrow.
Well just got the 15# of the 268gr boolit's sized and lubed to .431 and loaded up some 240gr boolits with 5.5 gr of bullseye to try
out for some light plinkers
Magtech 24 gauge cases??
http://www.hunt101.com/data/500/medium/MVC-003S25.JPG
Loaded 20 each 30-30 Win with 4320 and the Lee 150 and 113 gr fp boolits. 50/50 coww/pb air cooled LLA. If they shoot well I'll tell you.....https://uploads.tapatalk-cdn.com/201...af55b8c6f7.jpg
Sent from my SAMSUNG-SM-G930A using Tapatalk