#45 on the list ....Smoke4320 .. If possible I would like to change to a 4 cavity Solid .. now have 4 ..2 cav molds from 180 to 230
Printable View
#45 on the list ....Smoke4320 .. If possible I would like to change to a 4 cavity Solid .. now have 4 ..2 cav molds from 180 to 230
Please take me off the list, #30.
Put me down for a 2 cavity solid geraldsdatgmaildotcom.
Why in the world wouldn't you provide this basic information?? Please post the dimensions of this mold.Quote:
Originally Posted by 45 2.1
Please add me for one of the 3 cavity HP molds with the blank pins.
boo-haaa At hot mail dot com
Thanks!
Bushog
I don't post dimensions anymore. If you want something specific dimension, then ask. I also alter the drawing enough that while it looks the same, any proprietary dimension cannot be gained from scaling.Quote:
Originally Posted by catboat
Blank pins are included in the price (and that is from MiHec).Quote:
Originally Posted by bushog
Thread updated..............
Still curious if these will work in a 300 BLK.
Me too. If it will I'll sign on for one.Quote:
Originally Posted by wlc
I also think its a little silly to not post the dimensions in a weak attempt to control intellectual property; as if someone couldn't procure a sample and take measurements.
Happens all the time in the real world. Try it, you won't be able to come out with the correct dimensions....... just relatively close (which don't cut it).Quote:
Originally Posted by Oreo
I have tried it. Got close enough. Not with this boolit but with others. There's lots of clues to go by besides a physical sample and a modified sketch. Weight being a big one and other similar designs being another. I won't write a manual here but it can be done.
The real question is who are you worried about copying your design, and have you taken the necessary steps to legally protect your intellectual property? Are you willing to defend your copyrights in court?
Anyway to get this in Plain base? Thanks
deleted .. I got some bad info .. Still in
I for one respect him trying to protect his information and the pics and info given were good enough for me. If you have a question about oal or something, ask it.
We broke 50 and are pushing a year on this mold, any idea when it might get made?
I've asked that question to MiHec and haven't got a reply yet.Quote:
Originally Posted by Sgtonory
Thanks for the nod, some folks in this entitlement generation seem to think everything belongs to them. I do not know when this will go as I seldom get a notice for a last call or a warning when it will close.Quote:
Originally Posted by Finarfin
I would love to have a plain base option as well .. using as a subsonic 308 and 300 Blkout no need for the gas check
Thanks
I was here when 45 2.1 had to remove the dimensions from HIS drawings. I have no problem with it. IIRC he was always available to work out problems when Lee sent molds that didn't conform to the drawing. That is not a problem now but the principle is the same.Quote:
Originally Posted by Finarfin
45 2.1 would this bullet be okay to use in a Garand?
Sir, you do recall correctly..........in all the above.Quote:
Originally Posted by alamogunr
The boolit is especially for the Garand and shoots well in all the 30-06s i've tried it in.Quote:
Originally Posted by 1500FPS
Not really! It has been too long and sometimes I can't remember what I had for breakfast. I think I remember that someone was copying your designs and using them as their own. I believe it was when we were still on the old site(prior to 2005).Quote:
Originally Posted by 45 2.1
If i can get BP put me down for a 4 cavity solidQuote:
Originally Posted by 45 2.1
Onory 1 at gmail dot com