Out havin' fun with the 41

Went to the range today with my new Smith and Wesson
shot maybe 100 rounds all at 50 yards
consistently banging steel with my boolits
I tried 3 different styles and the Keith was by far the most accurate the others were the MP 41 hammer and the RCBS 210 gr Keith? but the Accurate Molds Keith was the clear winner
I used Isotope alloy and HS-6, 2400, A#9 and Unique for powders 2400 and #9 with heavier charges :Fire:
Going to have to go to the 100 yard bench next time
I did even shoot at a bullseye just for s&g and that did better than I though it would :Fire:

Now you know why some of us really like the .41. I never saw one that was not accurate. james

M57 - m58?

Sounds like you had a lot of fun. I like trying new bullets and powders for my favorite cartridges.

I've been hoping to come across a Blackhawk in 41 Magnum, I haven't gotten into the caliber yet.

M57

I shoot my .41's at 100 yards a lot. Can usually get 4-5" groups with Unique and Lyman 41032.

Gallon jugs at 200 are probably doable with that gun and load.

I started my love with the 41 with a 4-5/8" blued blackhawk. Then got a stainless bisley 5-1/2". That did feel way better but didn't shoot any better. Then I got a 57 in 6" form. The rugers are both gone. Added a Henry 41 lever, too. It is darn fun, too. I took a deer at 100 yds with the lever last fall. Only animal I've ever shot in the heart twice. I shoot marmots with the 57 and NOE 237 HPs. I'm solid to 50 yds or so. Still need to take big game with that one, and I can't wait.

What grips do you use on your m57? Thanks.

Got me. I expected a Model 41 not a .41. Can’t go wrong with a Smith wheelgun. My fav is a 625.

Favorite revolver round and favorite DA revolver...

https://www.24hourcampfire.com/ubbth...full/71363.jpg

Quote:

---

Originally Posted by RJM52

Favorite revolver round and favorite DA revolver...

https://www.24hourcampfire.com/ubbth...full/71363.jpg

---

Really like my 41's these are the greatest. Have the whole family of the "Class of 1989" 5, 4, 3 inch with green fiber optics and VZ grips GW

5" 1964 57...

https://www.24hourcampfire.com/ubbth...full/71362.jpg

out bangn steel at 100 yds yesterday
hit it once, ok a fluke but then hit again and again, just the way it should be

780 yards...

https://www.24hourcampfire.com/ubbth...full/89148.jpg

View from shooting position...

https://www.24hourcampfire.com/ubbth...full/89150.jpg


3x3' target....

https://www.24hourcampfire.com/ubbth...full/89149.jpg

Hogue rubber. It's not wood, but it feels good on a cold day. I have some hard polypro hogue on a 686; that starts off cold but warms quickly. Not gross on a hot day warm, but comfortable. But no recoil mitigation like a bigger gun can use.

Quote:

---

Originally Posted by RJM52

5" 1964 57...

https://www.24hourcampfire.com/ubbth...full/71362.jpg

---

A 5" N frame makes me go weak in the knees.

The one pictured here is also mine....

https://www.lostriverammocompany.com...10-FPS-100-RND

I killed a jackrabbit around 110 steps with a 4" M57. I did have a rest on the window of the truck and luck was with me but still fun to see him do a flip and start kicking. The old 41 mag is no slouch.

Another 41 fan here, have a 6.5" BH and a Henry.
Killed a doe quite a few years ago with the BH.
I think the deer know when I'm out and about with the Henry as I've never seen one while carrying it.
Maybe this will be the year. Got a 270 gr WFN loaded over some H110 that I'd like to see what it will do.

RP

New to the .41 with a 6 1/2" Blackhawk. As with most of Ruger's revolvers the same gremlins exist with the varying cylinder throats and a bit of thread choke. But it's already a fairly accurate revolver. Last night, when it was almost too dark to shoot I flung a few rounds offhand at my 100 yd. steel. Three out of the last five did purty good (The top three were already on the target)-

https://i.imgur.com/odoj7hnl.jpg

I'll soon be sending the cylinder off to have the throats reamed, then I'll fire-lap the barrel.

35W

Here's a 6" 657 that loves 215 grain SWC over 21 grains of accurate 11FS.

Some people will say we don't need a 41 magnum since it falls between the more popular 44 and 357 magnums. Those same people are the ones who say we don't need the 16 gauge since we have 12 gauges and 20 gauges. Those people are fools though and don't appreciate the finer things in life like 41s and 16 gauge shotguns. I refer to both the 41 and the 16 gauge as goldilocks, not too hot, not too cold, but just right.

Attachment 325634