If you could buy a reasonably priced ( similar or slightly less $$ to an 1894 marlin)5 shot clip fed, handy and light bolt action in 357 mag would you?
Printable View
If you could buy a reasonably priced ( similar or slightly less $$ to an 1894 marlin)5 shot clip fed, handy and light bolt action in 357 mag would you?
So fast it would make your head spin, maybe someone like CZ will take the idea to heart, I seriously doubt anyone in the U.S. would do it. Why, have you heard rumors? Do tell.
exile
I don't need one but would buy one, just because...:? I have Marlin 1894Cs and a Browning Lowall, so don't need another, but the cartridge is so much fun, and so easy to work with that it deserves another platform. The same platform could be used for 218 Bee, 25-20 Wcf, 32-20 Wcf, 256 Win Mag. I suppose the .327 Federal(?) would work. 10mm anyone?
I sent an email to Lipseys on this about a month ago. Told them that Ruger already chambered 22 Hornet and 44 Mag that Lipsey would hit a gold mine if they had a special run both in blued and then stainless. Don't know what will happen.
But Lipsey's is always looking for ideas for exclusives that they can run the margins up on. Email your dreams and desires:
http://www.lipseys.com/
hmmm, 357 mag bolt gun. Depends on the clip. If big boolits could be seated far out and still have it feed, I'd probaby have to get one.
if it could be converted to 357 Max or started out as a 357 Max. Most likely I'd probably try to acquire one.
I said "maybe" , but if it were 357 Maximum I'd buy it in a heartbeat.
Yes, if available in .357Max as well ! :)
Jerry
Gents!
We positively NEED any and all forms of rifles chambered for both the 357mag and the 357Max! Both are outstanding when used in light, handy rifles, and what fun they are as well!
I will gladly purchase rifles chambered in either fine cartridge.
358wcf[smilie=1:[smilie=1:[smilie=1:
I would consider buying such a rifle. I HAD a Rossi 92 and gave it to a nephew. Actually, I sold it to him for way LESS than I paid for it. I how have an H&R handi-rifle in that caliber. What kind of .357 rifle are you talking about. Would it be something like the old .30-30 bolt action or, some new design from Europe. My computer will not allow me to spell europe with a lower case e. Keeps underlining it in red. That's a good color for europe. Don't like their laws but, will buy their guns if the price is right.
I'm thinking a rem600 action with 20" brl. :)
Has anyone shouted "Group Buy" yet? Yes, I would buy a 357 Mag bolt rifle. The original proposal was something like "light and handy" or such. This sounds like a fun item that can offer multiple load development experiments. I would not even consider glass on this type of a system. Not that I don't regularly use (need) improved sight systems for these tired old eyes. I just like the light and handy concept for a stroll through the fields and timber. 357 Maximum? Yup, I would get in on that caliber if it were offered instead of the Magnum. Just keep it light and handy.
I would be happy if Ruger chambered their 44/77 in 357 mag with the ability to shoot the RCBS 200 grain bullet. I have two of the Browning lowwalls in 357 mag and they are fun to shoot.
I want ruger to make thier 77/44 in 41 Mag!
Yes to the .41 magnum. I would probably buy a .357 first though. I have recently discovered the .41 magnum and it is great.
exile
ummmm i would buy three! actually i really want a lever gun in .357 if i could find one round here! I"d take any gun in .357.
I might purchase one for the “uniqueness” of it…
Or, are there bolt actions presently available in the 357 Magnum cartridge and at what price and availability?...
But, would I like it more than my older 1894C that just enjoys 358429's and SR-4759?...
BCB
Actually I have this mangled carcano , if I could get any bbl for it .....................................
Maybe. It wolud depend if the gun has scaled to the size of the cartridge or not. I have no desire for a large ring 98 Mauser in .357, but something the size of a Model 43 Winchester would be great.
I am still kicking myself for not buying one of the Timberwolf .357 pumps when they were available.
Robert
One question - will this then be called rifle ammo - or will it still be pistol ammo? Makes a difference to those who live in commie countries like NJ ... :)
The answer relies on the legal status, not the caliber nor cartridge.
I was thinking something like a short throw Savage 340, Rem788. or a CZ action shrunk and SCALED down to make it LIGHT AND HANDY. The 357max is an awesome and underated cartridge and I am quite fond if it:p.....but......The only problem I see with the MAX in such a critter is people would compare it to the 35rem and sales would likely faulter. Once you get that LONG of an action the temptation would likely be too high to go to a more poetent round. I want an action that would be suitable for 38 special target with heavy boolits, 357 with normal boolits, 32/20, and all the calibers Excess listed minus the 10mm, but hey iffin ya want one in 10mm I am sure it would fit.[smilie=l:
a 357 that would shoot heavy 38's is the 1st caliber I want in this critter[smilie=l:.
Well if not 357 MAX, make the 357 Mag long enough to make it into a 360 DW. :)
I was thinking of the action used in the Inter Arms Mini Mk II AKA Rem 799
As I already have several of them in 223 , 7.62 x 39 and a 22 hornet
John
Shoot
Not only is a 357 mag / Max BA rifle on my wish list
But I would love the same size rifle in a 32/20 or even better a 25/20 with rifling cut for a cast boolit
IMO a near perfict plinking and virmem rifle
As I was forced to sell my 25/20 and 32/20 Marlins to pay bills a few years back
John
I'll agree 357 Max would be a MUST BUY NOW!
I could wait for a good deal on the 357 Mag...
Lever, Bolt, auto, pump, just make it a MAX!
I've got a 12" MAX barrel for the T/C and will be in Oklahoma City this weekend...
Ed's Contenders is there and could be the cure for this itch you gave me.
18-21" Stainless back scratcher is what I'll say it is!
Ken TN
If the 357mag was offered in a bolt I would for sure get a couple of them. I think the Ruger compact would be a great platform for it. I have shoulder troubles and this would help fill the bill (or the freezer) for me.
The only reason why I would say no on the max is it a different casing. It's nice going with the same thing in your revolver as the rifle.
357 yes. Have the Rossi and really enjoying it. Friend has a Greener Martini action in .357 that is the cat's meow! I'm a little envious. Looking real hard at the low walls, but really need something cheaper. The Handi rifles and Contenders are getting good reviews, I just prefer the falling block design.
Yes, a bolt .357 Max would be great. Use the Desert Eagle Magazines? Liked the .45ACP conversions of the Mauser, but didn't get one.
Greetings
ONLY if it could be made into a 357 Supermag.... I would have little use for a bolt 357 when a lever gun will do as well and reload alot faster.
A 357Max/supermag could likely be made to work on a 223 stevens 200 centerfeed with the right man doing the work.................I am not that man, but if I had the $$ I know a guy that could likely make it happen......hmmmmmmmmmmmmm
Why not take a 223 rem rifle and find someone to turn the rims down on Max brass to rimless. Tried this in an AR, but mags were the drawback. Might have to try this with a bolt action.
I was looking on line, and found a company that makes pumps chambered in .38 Spec, 38-40,44-40, and 45 colt, that would chamber it in a .357 magnum...Haven't asked about .357 Max....
AWguns.com
The rifles are the Lightning, start at 850.00, and they would do the chambering and stamping and rebluing of the barrel for another 125.00. They responded very quickly to my emails when I emailed them.
I have an old 95 Mauser that I was making into a 7mm BR. It looks like it would be just about the right length for a 357 Max after it was shortened. Pictured with a 50 S&Whttp://i95.photobucket.com/albums/l1...r/Mouser95.jpg
If'n I were to design a 357 Max bolt rifle it would be a rear locking system which makes for a very short throw indeed and plenty stiff at those lengths. (Using a 30-30 as a parent case would be tempting too![smilie=1:) Mind you, a 41 maximum using a 303 Brit case would make sense in my part of the world ...... mmmm!:roll:
REMINGTON 788 fan 303?
John,
Try feeding a couple of dummies through one of your 7.62X39mm Mini Mausers. They wont fully chamber, but the bolt face is very close to the correct size. There was a thread were Felix suggested a switch barrel for a benchrest gun that got me thinking about it. I know mine (Which is the Charles Daly version), fed from the right side, but can't remember if the second round would feed or not, (or if I even tried two rounds in the magazine). It would be a fairly simple rebarreling job if it will feed from both sides of the magazine.
Robert
:drinks: 8-)
Very intriguing John. I've shortened a couple small ring Mausers for single-shot actions for 22 Super Jet and 218 Mashburn Bee. I also built a Mauser 98 chambered for 375 Winchester as a repeater so I have to believe that with a bit of futzing around a guy could build a 357 Max on a shortened 93/95/96 action. I'm not sure the 93 with its flattened bolt bottom face would work or not. In your opinion, do you think a 357 Mag could be made to function?
Edd
I was thinking the same thing. Something along the lines of a modified #4 LE. Slim it, shorten it, make it to bed in a one piece stock. The removable bolt head would allow for rimed or rimless and the trigger could be modded for a decent modern unit.
357, 32-20, 35 Rem, 44 mag, 25-35, 219 Zipper....I can see some possibilities.
The rimmed cartridges can be a feeding problem. Bolt face can have a ring soldered to it and machined. I have welded up bolt faces for low pressure rounds like the 22 Hornet on a model 70. May work best to use some sort of existing mag instead of trying to work over the feed rails. Working on a mod. 54 in 218 Bee now, using a 22 Hornet box mag. Need to use the feed pusher on the bolt just like the 22 Hornet. It had a 30-06 barrel that I put a center fire 22 caliber liner in.